lkml.org 
[lkml]   [2022]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] USB: usb-serial-simple: add new device id for OPPO R11
On Sat, Jul 16, 2022 at 02:13:34PM +0200, Reinhard Speyerer wrote:
> On Fri, Jul 15, 2022 at 10:59:13PM +0800, sdlyyxy wrote:
> >
> > > On Jul 15, 2022, at 22:24, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > >
> > > The Oppo R11 diagnostic USB connection needs to be bound to the
> > > usb-serial-simple driver as it just wants to use a dumb pipe to
> > > communicate to the host.
> > >
> > > usb-devices output:
> > > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
> > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> > > P: Vendor=22d9 ProdID=276c Rev=04.04
> > > S: Manufacturer=OPPO
> > > S: Product=SDM660-MTP _SN:09C6BCA7
> > > S: SerialNumber=beb2c403
> > > C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
> > > I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30
> > >
> > > Reported-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
> > > Cc: Johan Hovold <johan@kernel.org>
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > ---
> > > drivers/usb/serial/usb-serial-simple.c | 4 +++-
> > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
> > > index 4c6747889a19..eb832b94aa3a 100644
> > > --- a/drivers/usb/serial/usb-serial-simple.c
> > > +++ b/drivers/usb/serial/usb-serial-simple.c
> > > @@ -60,7 +60,9 @@ DEVICE(flashloader, FLASHLOADER_IDS);
> > > { USB_VENDOR_AND_INTERFACE_INFO(0x18d1, \
> > > USB_CLASS_VENDOR_SPEC, \
> > > 0x50, \
> > > - 0x01) }
> > > + 0x01) }, \
> > > + { USB_DEVICE_AND_INTERFACE_INFO(0x22d9, 0x276c, \
> > > + 0xff, 0xff, 0x30) }
> > > DEVICE(google, GOOGLE_IDS);
> > >
> > > /* Libtransistor USB console */
> > > --
> > > 2.37.1
> > Tested-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
>
> While this may work sufficiently well for real low-volume diag traffic I'd
> expect a significant percentage of diag messages to be lost in practice
> with the usb-serial-simple driver.
>
> According to the usb-devices output this looks like the Qualcomm USB gadget
> in the DIAG + ADB composition to me.
>
> Since the option driver uses the usb-wwan framework my suggestion would be
> for the original patch to be applied instead similar to what has been done
> e.g. for the Quectel RM500Q diag port.

But this is not using the option chip, nor using the option flow control
protocol at all, so it should not be showing up as a device controlled
by the option driver. It just will not work properly, the simple driver
should be doing the exact same thing here.

thank,

greg k-h

\
 
 \ /
  Last update: 2022-07-17 22:15    [W:0.106 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site