[lkml]   [2022]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH] arm64: dts: rockchip: rk3399-nanopi4: Fix voltage regulator config
A series of issues exist around the "vcc3v0_sd" voltage regulator that
made it necessary to mark it "always-on".

With the patch "regulator: core: Resolve supply name earlier to prevent
double-init", this option is no longer necessary.

Removing this option not only prevents a hang when rebooting Nanopi R4S,
it also ensures that bootloaders like u-boot can boot from an SD card
right away, without out-of-tree patches that re-initialize voltage levels.

Signed-off-by: Christian Kohlschütter <>
arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..55b93eac2f99 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -70,7 +70,6 @@ vcc3v0_sd: vcc3v0-sd {
gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_pwr_h>;
- regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc3v0_sd";

 \ /
  Last update: 2022-07-17 21:30    [W:0.054 / U:1.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site