lkml.org 
[lkml]   [2022]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] hwmon: (aquacomputer_d5next) Add D5 Next fan control support
From
On 7/17/22 08:41, Aleksa Savic wrote:
> Define pump and fan speed register offsets in
> D5 Next control report, as well as its size, to expose PWM fan control.
>
> Signed-off-by: Jack Doan <me@jackdoan.com>
> Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>

This suggests that Jack Doan was the author of this patch, not
Aleksa Savic. However, that is not reflected in the patch itself.
Please either use Originally-from: instead of Signed-off-by:
or make sure that the original author is listed correctly.

Thanks,
Guenter

> ---
> drivers/hwmon/aquacomputer_d5next.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
> index 0e56cc711a26..997d72ea6182 100644
> --- a/drivers/hwmon/aquacomputer_d5next.c
> +++ b/drivers/hwmon/aquacomputer_d5next.c
> @@ -71,8 +71,12 @@ static u8 secondary_ctrl_report[] = {
> #define D5NEXT_PUMP_OFFSET 0x6c
> #define D5NEXT_FAN_OFFSET 0x5f
> #define D5NEXT_5V_VOLTAGE 0x39
> +#define D5NEXT_CTRL_REPORT_SIZE 0x329
> static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
>
> +/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
> +static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
> +
> /* Register offsets for the Farbwerk RGB controller */
> #define FARBWERK_NUM_SENSORS 4
> #define FARBWERK_SENSOR_START 0x2f
> @@ -667,9 +671,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
>
> priv->num_fans = D5NEXT_NUM_FANS;
> priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
> + priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
> priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
> priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
> priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
> + priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
>
> priv->temp_label = label_d5next_temp;
> priv->speed_label = label_d5next_speeds;

\
 
 \ /
  Last update: 2022-07-17 18:16    [W:0.039 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site