lkml.org 
[lkml]   [2022]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RESEND PATCH v2 2/3] drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC
From
Hi--

On 7/15/22 08:13, Shuai Xue wrote:
> Add the DDR Sub-System Driveway Performance Monitoring Unit (PMU) driver
> support for Alibaba T-Head Yitian 710 SoC chip. Yitian supports DDR5/4
> DRAM and targets cloud computing and HPC.
>
> Each PMU is registered as a device in /sys/bus/event_source/devices, and
> users can select event to monitor in each sub-channel, independently. For
> example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two
> sub-channels of the same channel in die 0. And the PMU device of die 1 is
> prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000.
>
> Due to hardware limitation, one of DDRSS Driveway PMU overflow interrupt
> shares the same irq number with MPAM ERR_IRQ. To register DDRSS PMU and
> MPAM drivers successfully, add IRQF_SHARED flag.
>
> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
> Co-developed-by: Hongbo Yao <yaohongbo@linux.alibaba.com>
> Signed-off-by: Hongbo Yao <yaohongbo@linux.alibaba.com>
> Co-developed-by: Neng Chen <nengchen@linux.alibaba.com>
> Signed-off-by: Neng Chen <nengchen@linux.alibaba.com>
> ---
> drivers/perf/Kconfig | 8 +
> drivers/perf/Makefile | 1 +
> drivers/perf/alibaba_uncore_drw_pmu.c | 793 ++++++++++++++++++++++++++
> 3 files changed, 802 insertions(+)
> create mode 100644 drivers/perf/alibaba_uncore_drw_pmu.c
>
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 1e2d69453771..dfafba4cb066 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -183,6 +183,14 @@ config APPLE_M1_CPU_PMU
> Provides support for the non-architectural CPU PMUs present on
> the Apple M1 SoCs and derivatives.
>
> +config ALIBABA_UNCORE_DRW_PMU
> + tristate "Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver"
> + depends on (ARM64 && ACPI)
> + default m

Why should this driver be automatically built?
I.e., why is the "default m" here at all?

Thanks.

> + help
> + Support for Driveway PMU events monitoring on Yitian 710 DDR
> + Sub-system.


--
~Randy

\
 
 \ /
  Last update: 2022-07-15 21:07    [W:0.310 / U:22.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site