lkml.org 
[lkml]   [2022]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 05/19] dt-bindings: power: mediatek: Refine multiple level power domain nodes
From
On 14/07/2022 14:28, Tinghan Shen wrote:
> Extract duplicated properties and support more levels of power
> domain nodes.
>
> This change fix following error when do dtbs_check,
> arch/arm64/boot/dts/mediatek/mt8195-evb.dtb: power-controller: power-domain@15:power-domain@16:power-domain@18: 'power-domain@19', 'power-domain@20', 'power-domain@21' do not match any of the regexes: 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>
> Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
> ---
> .../power/mediatek,power-controller.yaml | 119 +-----------------
> 1 file changed, 6 insertions(+), 113 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> index be81cd97afa4..e5494a330716 100644
> --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -42,6 +42,10 @@ properties:
>
> patternProperties:
> "^power-domain@[0-9a-f]+$":
> + $ref: "#/$defs/power-domain-node"
> +
> +$defs:
> + power-domain-node:
> type: object
> description: |
> Represents the power domains within the power controller node as documented
> @@ -100,122 +104,11 @@ patternProperties:
> $ref: /schemas/types.yaml#/definitions/phandle
> description: phandle to the device containing the SMI register range.
>
> - patternProperties:
> - "^power-domain@[0-9a-f]+$":
> - type: object
> - description: |
> - Represents a power domain child within a power domain parent node.
> -
> - properties:
> -
> - '#power-domain-cells':
> - description:
> - Must be 0 for nodes representing a single PM domain and 1 for nodes
> - providing multiple PM domains.
> -
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - reg:
> - maxItems: 1
> -
> - clocks:
> - description: |
> - A number of phandles to clocks that need to be enabled during domain
> - power-up sequencing.
> -
> - clock-names:
> - description: |
> - List of names of clocks, in order to match the power-up sequencing
> - for each power domain we need to group the clocks by name. BASIC
> - clocks need to be enabled before enabling the corresponding power
> - domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> - SUSBYS clocks need to be enabled before releasing the bus protection,
> - and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> -
> - In order to follow properly the power-up sequencing, the clocks must
> - be specified by order, adding first the BASIC clocks followed by the
> - SUSBSYS clocks.
> -
> - domain-supply:
> - description: domain regulator supply.
> -
> - mediatek,infracfg:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description: phandle to the device containing the INFRACFG register range.
> -
> - mediatek,smi:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description: phandle to the device containing the SMI register range.
> -
> - patternProperties:
> - "^power-domain@[0-9a-f]+$":
> - type: object
> - description: |
> - Represents a power domain child within a power domain parent node.
> -
> - properties:
> -
> - '#power-domain-cells':
> - description:
> - Must be 0 for nodes representing a single PM domain and 1 for nodes
> - providing multiple PM domains.
> -
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - reg:
> - maxItems: 1
> -
> - clocks:
> - description: |
> - A number of phandles to clocks that need to be enabled during domain
> - power-up sequencing.
> -
> - clock-names:
> - description: |
> - List of names of clocks, in order to match the power-up sequencing
> - for each power domain we need to group the clocks by name. BASIC
> - clocks need to be enabled before enabling the corresponding power
> - domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> - SUSBYS clocks need to be enabled before releasing the bus protection,
> - and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> -
> - In order to follow properly the power-up sequencing, the clocks must
> - be specified by order, adding first the BASIC clocks followed by the
> - SUSBSYS clocks.
> -
> - domain-supply:
> - description: domain regulator supply.
> -
> - mediatek,infracfg:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description: phandle to the device containing the INFRACFG register range.
> -
> - mediatek,smi:
> - $ref: /schemas/types.yaml#/definitions/phandle
> - description: phandle to the device containing the SMI register range.
> -
> - required:
> - - reg
> -
> - additionalProperties: false
> -
> - required:
> - - reg
> -
> - additionalProperties: false
> -
> required:
> - reg
>
> - additionalProperties: false
> + additionalProperties:
> + $ref: "#/$defs/power-domain-node"

That's an interesting construction - endless recurrence. I did not know
it works like that... How about making it a bit more specific? Defining
defs "power-domain-node" for just one child (without
additionalProperties piece) and (maybe with just one more level):

@@ -43,6 +43,12 @@ patternProperties:

"^power-domain@[0-9a-f]+$":

$ref: "#/$defs/power-domain-node"



+ patternProperties:

+ "^power-domain@[0-9a-f]+$":

+ $ref: "#/$defs/power-domain-node"

+ unevaluatedProperties: false

+ unevaluatedProperties: false

+

$defs:

power-domain-node:

type: object

@@ -105,9 +111,6 @@ $defs:

required:

- reg



- additionalProperties:

- $ref: "#/$defs/power-domain-node"

-

required:

- compatible




Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-07-15 10:09    [W:0.122 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site