lkml.org 
[lkml]   [2022]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] tty: serial: fsl_lpuart: correct the count of break characters
Date


> Subject: Re: [PATCH 1/2] tty: serial: fsl_lpuart: correct the count of break
> characters
>
> Am 2022-07-15 04:59, schrieb Sherry Sun:
> > The LPUART can't distinguish between a break signal and a framing
> > error, so need to count the break characters if there is a framing
> > error and received data is zero instead of the parity error.
>
> Ah, it seems I mixed up the framing and the partiy error. Did you test the
> break in the receive path, though?
>

Hi Michael, yes, I have tested this, with this fix patch, the sport->port.icount.brk is correctly now.

Best regards
Sherry

> -michael
>
> >
> > Fixes: 5541a9bacfe5 ("serial: fsl_lpuart: handle break and make sysrq
> > work")
> > Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
> > ---
> > drivers/tty/serial/fsl_lpuart.c | 12 ++++++------
> > 1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/tty/serial/fsl_lpuart.c
> > b/drivers/tty/serial/fsl_lpuart.c index fc7d235a1e27..b6365566a460
> > 100644
> > --- a/drivers/tty/serial/fsl_lpuart.c
> > +++ b/drivers/tty/serial/fsl_lpuart.c
> > @@ -990,12 +990,12 @@ static void lpuart32_rxint(struct lpuart_port
> > *sport)
> >
> > if (sr & (UARTSTAT_PE | UARTSTAT_OR | UARTSTAT_FE)) {
> > if (sr & UARTSTAT_PE) {
> > + sport->port.icount.parity++;
> > + } else if (sr & UARTSTAT_FE) {
> > if (is_break)
> > sport->port.icount.brk++;
> > else
> > - sport->port.icount.parity++;
> > - } else if (sr & UARTSTAT_FE) {
> > - sport->port.icount.frame++;
> > + sport->port.icount.frame++;
> > }
> >
> > if (sr & UARTSTAT_OR)
> > @@ -1010,12 +1010,12 @@ static void lpuart32_rxint(struct lpuart_port
> > *sport)
> > sr &= sport->port.read_status_mask;
> >
> > if (sr & UARTSTAT_PE) {
> > + flg = TTY_PARITY;
> > + } else if (sr & UARTSTAT_FE) {
> > if (is_break)
> > flg = TTY_BREAK;
> > else
> > - flg = TTY_PARITY;
> > - } else if (sr & UARTSTAT_FE) {
> > - flg = TTY_FRAME;
> > + flg = TTY_FRAME;
> > }
> >
> > if (sr & UARTSTAT_OR)
>
> --
> -michael

\
 
 \ /
  Last update: 2022-07-15 09:24    [W:0.054 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site