Messages in this thread | | | Date | Thu, 14 Jul 2022 15:04:07 -0700 (PDT) | Subject | Re: [PATCH v5 00/13] Canaan devicetree fixes | From | Palmer Dabbelt <> |
| |
On Tue, 05 Jul 2022 14:52:01 PDT (-0700), mail@conchuod.ie wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Hey all, > This series should rid us of dtbs_check errors for the RISC-V Canaan k210 > based boards. To make keeping it that way a little easier, I changed the > Canaan devicetree Makefile so that it would build all of the devicetrees > in the directory if SOC_CANAAN. > > I *DO NOT* have any Canaan hardware so I have not tested any of this in > action. Since I sent v1, I tried to buy some since it's cheap - but could > out of the limited stockists none seemed to want to deliver to Ireland :( > I based the series on next-20220617. > > Thanks, > Conor. > > Changes since v4: > - add Rob's tags from v3 > - sram: rephrase the binding description > - ASoC: dropped the applied binding > > Changes since v3: > - dts: drop the bogus "regs" property pointed out by Niklas > - dma/timer: add Serge's reviews (and expand on the dma interrupt > description) > - dts: add Niklas' T-b where I felt it was suitable. lmk if you think it > applies more broadly > - spi: drop the applied spi dt-binding change. Thanks Mark. > > Changes since v2: > - i2s: added clocks maxItems > - dma: unconditionally extended the interrupts & dropped canaan > compatible > - timer: as per Sergey, split the timer dts nodes in 2 & drop the > binding patch > - ili9341: add a canaan specific compatible to the binding and dts > > Changes since v1: > - I added a new dt node & compatible for the SRAM memory controller due > Damien's wish to preserve the inter-op with U-Boot. > - The dw-apb-ssi binding now uses the default rx/tx widths > - A new patch fixes bus {ranges,reg} warnings > - Rearranged the patches in a slightly more logical order > > Conor Dooley (13): > dt-bindings: display: convert ilitek,ili9341.txt to dt-schema > dt-bindings: display: ili9341: document canaan kd233's lcd > dt-bindings: dma: dw-axi-dmac: extend the number of interrupts > dt-bindings: memory-controllers: add canaan k210 sram controller > riscv: dts: canaan: fix the k210's memory node > riscv: dts: canaan: fix the k210's timer nodes > riscv: dts: canaan: fix mmc node names > riscv: dts: canaan: fix kd233 display spi frequency > riscv: dts: canaan: use custom compatible for k210 i2s > riscv: dts: canaan: remove spi-max-frequency from controllers > riscv: dts: canaan: fix bus {ranges,reg} warnings > riscv: dts: canaan: add specific compatible for kd233's LCD > riscv: dts: canaan: build all devicetress if SOC_CANAAN > > .../bindings/display/ilitek,ili9341.txt | 27 ------- > .../display/panel/ilitek,ili9341.yaml | 49 +++++++++---- > .../bindings/dma/snps,dw-axi-dmac.yaml | 7 +- > .../memory-controllers/canaan,k210-sram.yaml | 52 +++++++++++++ > arch/riscv/boot/dts/canaan/Makefile | 10 ++- > arch/riscv/boot/dts/canaan/canaan_kd233.dts | 6 +- > arch/riscv/boot/dts/canaan/k210.dtsi | 73 +++++++++++++------ > .../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +- > .../boot/dts/canaan/sipeed_maix_dock.dts | 2 +- > arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +- > .../boot/dts/canaan/sipeed_maixduino.dts | 2 +- > 11 files changed, 159 insertions(+), 73 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt > create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
I'm trying to sort out how to merge this one. I'm not opposed to taking it through the RISC-V tree as Rob's reviewed/acked the bindings, but just figured I'd say something before putting anything on for-next to try and minimize confusion.
Unless I'm missing something it's just patch 3 that's been taken so far, via Vinod's tree. I've dropped that one and put the rest on palmer/riscv-canaan_dt_schema, if that looks good then I'll take it into riscv/for-next when this loops back to the top of my queue.
Thanks!
| |