lkml.org 
[lkml]   [2022]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/5] scsi: hisi_sas: Modify v3 HW SATA completion error processing
Date
From: Xingui Yang <yangxingui@huawei.com>

If the I/O completion response frame returned by the target device has been
written to the host memory and the err bit in the status field of the
received fis is 1, ts->stat should set to SAS_PROTO_RESPONSE, and this will
let EH analyze and further determine cause of failure.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 4d3eb53a8209..efe8c5be5870 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -481,6 +481,9 @@ struct hisi_sas_err_record_v3 {
#define RX_DATA_LEN_UNDERFLOW_OFF 6
#define RX_DATA_LEN_UNDERFLOW_MSK (1 << RX_DATA_LEN_UNDERFLOW_OFF)

+#define RX_FIS_STATUS_ERR_OFF 0
+#define RX_FIS_STATUS_ERR_MSK (1 << RX_FIS_STATUS_ERR_OFF)
+
#define HISI_SAS_COMMAND_ENTRIES_V3_HW 4096
#define HISI_SAS_MSI_COUNT_V3_HW 32

@@ -2161,6 +2164,7 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
hisi_sas_status_buf_addr_mem(slot);
u32 dma_rx_err_type = le32_to_cpu(record->dma_rx_err_type);
u32 trans_tx_fail_type = le32_to_cpu(record->trans_tx_fail_type);
+ u16 sipc_rx_err_type = le16_to_cpu(record->sipc_rx_err_type);
u32 dw3 = le32_to_cpu(complete_hdr->dw3);

switch (task->task_proto) {
@@ -2188,7 +2192,10 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
+ if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
+ (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
+ ts->stat = SAS_PROTO_RESPONSE;
+ } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
ts->residual = trans_tx_fail_type;
ts->stat = SAS_DATA_UNDERRUN;
} else if (dw3 & CMPLT_HDR_IO_IN_TARGET_MSK) {
--
2.35.3
\
 
 \ /
  Last update: 2022-07-14 20:32    [W:0.063 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site