lkml.org 
[lkml]   [2022]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v1 2/2] riscv: dts: starfive: add the missing monitor core
From
Date
在 2022-07-13星期三的 14:55 +0000,Conor.Dooley@microchip.com写道:
> On 13/07/2022 15:26, Icenowy Zheng wrote:
> >
> > 在 2022-07-11星期一的 19:43 +0100,Conor Dooley写道:
> > > From: Conor Dooley <conor.dooley@microchip.com>
> > >
> > > The JH7100 has a 32 bit monitor core that is missing from the
> > > device
> > > tree. Add it (and its cpu-map entry) to more accurately reflect
> > > the
> > > actual topology of the SoC.
> > >
> > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> > > ---
> > >  arch/riscv/boot/dts/starfive/jh7100.dtsi | 21
> > > +++++++++++++++++++++
> > >  1 file changed, 21 insertions(+)
> > >
> > > diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > index c617a61e26e2..92fce5b66d3d 100644
> > > --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> > > @@ -67,6 +67,23 @@ cpu1_intc: interrupt-controller {
> > >                         };
> > >                 };
> > >
> > > +               E24: cpu@2 {
> > > +                       compatible = "sifive,e24", "riscv";
> > > +                       reg = <2>;
> > > +                       device_type = "cpu";
> > > +                       i-cache-block-size = <32>;
> > > +                       i-cache-sets = <256>;
> > > +                       i-cache-size = <16384>;
> > > +                       riscv,isa = "rv32imafc";
> > > +                       status = "disabled";
> > > +
> > > +                       cpu2_intc: interrupt-controller {
> > > +                               compatible = "riscv,cpu-intc";
> > > +                               interrupt-controller;
> > > +                               #interrupt-cells = <1>;
> > > +                       };
> > > +               };
> > > +
> > >                 cpu-map {
> > >                         cluster0 {
> > >                                 core0 {
> > > @@ -76,6 +93,10 @@ core0 {
> > >                                 core1 {
> > >                                         cpu = <&U74_1>;
> > >                                 };
> > > +
> > > +                               core2 {
> > > +                                       cpu = <&E24>;
> > > +                               };
> >
> > Sorry but I think this change makes the topology more inaccurate.
> >
> > The E24 core is very independent, just another CPU core connected
> > the
> > same bus -- even no coherency (E24 takes AHB, which is not
> > coherency-
> > sensible). Even the TAP of it is independent with the U74 TAP.
> >
> > And by default it does not boot any proper code (if a debugger is
> > attached, it will discover that the E24 is in consistently fault at
> > 0x0
> > (mtvec is 0x0 and when fault it jumps to 0x0 and fault again),
> > until
> > its clock is just shutdown by Linux cleaning up unused clocks.)
> >
> > Personally I think it should be implemented as a remoteproc
> > instead.
>
> Maybe I am missing something, but I don't quite get what the detail
> of how we access this in code has to do with the devicetree?
> It is added here in a disabled state, and will not be used by Linux.
> The various SiFive SoCs & SiFive corecomplex users that have a hart
> not capable of running Linux also have that hart documented in the
> devicetree.
> To me, what we are choosing to do with this hart does not really
> matter very much, since this is a description of what the hardware
> actually looks like.

The E24 is not in the core complex at all. It's just a dedicate CPU
connected to another bus (well as I saw the document says the E24 bus
is maximum 2G, I doubt whether it's the same bus with the U74 one).

The U74 MC only allows S5 management cores to be part of it, not E24.

BTW I don't think a core complex can have multiple TAPs for multiple
harts, but E24 has its own TAP.

>
> Thanks,
> Conor.
>

\
 
 \ /
  Last update: 2022-07-13 17:05    [W:0.102 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site