lkml.org 
[lkml]   [2022]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/7] arm64: dts: qcom: sc8280xp: fix USB interrupts
On Wed, Jul 13, 2022 at 09:12:28AM -0500, Andrew Halaney wrote:
> On Wed, Jul 13, 2022 at 03:13:38PM +0200, Johan Hovold wrote:
> > The two single-port SC8280XP USB controllers do not have an hs_phy_irq
> > interrupt. Instead they have a pwr_event interrupt which is distinct
> > from the former and not yet supported by the driver.
> >
> > Fix the USB node interrupt names so that they match the devicetree
> > binding.
> >
> > Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> > Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> > ---
> > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 12 ++++++++----
> > 1 file changed, 8 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > index 45cc7d714fd2..4a7aa9992f3a 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> > @@ -1875,8 +1875,10 @@ usb_0: usb@a6f8800 {
> > <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
> > <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
> > <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> > - "dm_hs_phy_irq", "ss_phy_irq";
> > + interrupt-names = "pwr_event",
> > + "dp_hs_phy_irq",
> > + "dm_hs_phy_irq",
> > + "ss_phy_irq";
> >
> > power-domains = <&gcc USB30_PRIM_GDSC>;
> >
> > @@ -1925,8 +1927,10 @@ usb_1: usb@a8f8800 {
> > <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
> > <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
> > <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
> > - "dm_hs_phy_irq", "ss_phy_irq";
> > + interrupt-names = "pwr_event",
> > + "dp_hs_phy_irq",
> > + "dm_hs_phy_irq",
> > + "ss_phy_irq";
>
> For this specific change to pwr_event:
>
> Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
>
> That being said, I was reviewing this against the (fairly old)
> downstream release I have, and the IRQs defined there look like this:
>
> interrupts-extended = <&pdc 12 IRQ_TYPE_EDGE_RISING>,
> <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
> <&pdc 136 IRQ_TYPE_LEVEL_HIGH>,
> <&pdc 13 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",
> "ss_phy_irq", "dm_hs_phy_irq";
>
> The part I want to highlight is that the "pwr_event" irq downstream maps
> to <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>, but the current upstream
> devicetree I'm looking at has it mapped to <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>
>
> Do you happen to have any source you can also check to confirm if this
> is a bug or not?

Good catch! I believe this is another copy-paste error when creating
base dtsi based on some vendor source (or perhaps an error carried over
from an earlier version).

The vendor devicetree I have access to also has 811 here, which matches
the pattern for usb_0 (dwc3 interrupt + 1).

Do you mind if I fold a fix for that into a v2 of this patch?

Thanks for reviewing!

Johan

\
 
 \ /
  Last update: 2022-07-13 16:36    [W:0.080 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site