lkml.org 
[lkml]   [2022]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/6] arm64: dts: imx8mm-kontron: Remove low DDRC operating point
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

For some reason there is a problem with finding a DDR configuration
that works on all operating points and all LPDDR4 types used on the
SoM. Therefore the bootloader currently doesn't configure the lowest
of the three operating points. Let's also skip this in the kernel
devicetree to make sure it isn't used.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 4 ----
1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 77c074b491a6..2d0661cce89b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -46,10 +46,6 @@ &ddrc {
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";

- opp-25M {
- opp-hz = /bits/ 64 <25000000>;
- };
-
opp-100M {
opp-hz = /bits/ 64 <100000000>;
};
--
2.37.0
\
 
 \ /
  Last update: 2022-07-13 09:49    [W:0.192 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site