lkml.org 
[lkml]   [2022]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH net v4 1/3] stmmac: dwmac-mediatek: fix clock issue
From
Date
Dear Matthias,
Thanks for your comments~

On Wed, 2022-07-13 at 14:11 +0200, Matthias Brugger wrote:
>
> On 13/07/2022 12:10, Biao Huang wrote:
> > The pm_runtime takes care of the clock handling in current
> > stmmac drivers, and dwmac-mediatek implement the
> > mediatek_dwmac_clks_config() as the callback for pm_runtime.
> >
> > Then, stripping duplicated clocks handling in old init()/exit()
> > to fix clock issue in suspend/resume test.
> >
> > As to clocks in probe/remove, vendor need symmetric handling to
> > ensure clocks balance.
> >
> > Test pass, including suspend/resume and ko insertion/remove.
> >
> > Fixes: 3186bdad97d5 ("stmmac: dwmac-mediatek: add platform level
> > clocks management")
> > Signed-off-by: Biao Huang <biao.huang@mediatek.com>
> > ---
> > .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 49 ++++++++----
> > -------
> > 1 file changed, 21 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> > b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> > index 6ff88df58767..ca8ab290013c 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
> > @@ -576,32 +576,7 @@ static int mediatek_dwmac_init(struct
> > platform_device *pdev, void *priv)
> > }
> > }
> >
> > - ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
> > - if (ret) {
> > - dev_err(plat->dev, "failed to enable clks, err = %d\n",
> > ret);
> > - return ret;
> > - }
> > -
> > - ret = clk_prepare_enable(plat->rmii_internal_clk);
> > - if (ret) {
> > - dev_err(plat->dev, "failed to enable rmii internal clk,
> > err = %d\n", ret);
> > - goto err_clk;
> > - }
> > -
> > return 0;
> > -
> > -err_clk:
> > - clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
> > - return ret;
> > -}
> > -
> > -static void mediatek_dwmac_exit(struct platform_device *pdev, void
> > *priv)
> > -{
> > - struct mediatek_dwmac_plat_data *plat = priv;
> > - const struct mediatek_dwmac_variant *variant = plat->variant;
> > -
> > - clk_disable_unprepare(plat->rmii_internal_clk);
> > - clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
> > }
> >
> > static int mediatek_dwmac_clks_config(void *priv, bool enabled)
> > @@ -643,7 +618,6 @@ static int mediatek_dwmac_common_data(struct
> > platform_device *pdev,
> > plat->addr64 = priv_plat->variant->dma_bit_mask;
> > plat->bsp_priv = priv_plat;
> > plat->init = mediatek_dwmac_init;
> > - plat->exit = mediatek_dwmac_exit;
> > plat->clks_config = mediatek_dwmac_clks_config;
> > if (priv_plat->variant->dwmac_fix_mac_speed)
> > plat->fix_mac_speed = priv_plat->variant-
> > >dwmac_fix_mac_speed;
> > @@ -712,13 +686,32 @@ static int mediatek_dwmac_probe(struct
> > platform_device *pdev)
> > mediatek_dwmac_common_data(pdev, plat_dat, priv_plat);
> > mediatek_dwmac_init(pdev, priv_plat);
> >
> > + ret = mediatek_dwmac_clks_config(priv_plat, true);
> > + if (ret)
> > + return ret;
> > +
> > ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
> > if (ret) {
> > stmmac_remove_config_dt(pdev, plat_dat);
> > - return ret;
> > + goto err_drv_probe;
> > }
> >
> > return 0;
> > +
> > +err_drv_probe:
> > + mediatek_dwmac_clks_config(priv_plat, false);
> > + return ret;
> > +}
> > +
> > +static int mediatek_dwmac_remove(struct platform_device *pdev)
> > +{
> > + struct mediatek_dwmac_plat_data *priv_plat =
> > get_stmmac_bsp_priv(&pdev->dev);
> > + int ret;
> > +
> > + ret = stmmac_pltfr_remove(pdev);
> > + mediatek_dwmac_clks_config(priv_plat, false);
> > +
>
> We enalbe the clocks after calling stmmac_probe_config_dt(), so we
> should
> disable them before calling stmmac_pltfr_remove(), correct?
>
> Other then that:
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

To ensure the hw configuration in stmmac_pltfr_remove behavior
normally, we should disable clocks after stmmac_pltfr_remove.

And there is no order requirement between clocks configured by
stmmac_probe_config_dt/stmmac_remove_config_dt and clocks
configured by mediatek_dwmac_clks_config, so it's safe for
current snippet.

Best Regards!
Biao

>
> > + return ret;
> > }
> >
> > static const struct of_device_id mediatek_dwmac_match[] = {
> > @@ -733,7 +726,7 @@ MODULE_DEVICE_TABLE(of, mediatek_dwmac_match);
> >
> > static struct platform_driver mediatek_dwmac_driver = {
> > .probe = mediatek_dwmac_probe,
> > - .remove = stmmac_pltfr_remove,
> > + .remove = mediatek_dwmac_remove,
> > .driver = {
> > .name = "dwmac-mediatek",
> > .pm = &stmmac_pltfr_pm_ops,

\
 
 \ /
  Last update: 2022-07-14 03:19    [W:0.063 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site