lkml.org 
[lkml]   [2022]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next: PATCH] net: dsa: mv88e6xxx: fix speed setting for CPU/DSA ports
Date
Commit 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
stopped relying on SPEED_MAX constant and hardcoded speed settings
for the switch ports and rely on phylink configuration.

It turned out, however, that when the relevant code is called,
the mac_capabilites of CPU/DSA port remain unset.
mv88e6xxx_setup_port() is called via mv88e6xxx_setup() in
dsa_tree_setup_switches(), which precedes setting the caps in
phylink_get_caps down in the chain of dsa_tree_setup_ports().

As a result the mac_capabilites are 0 and the default speed for CPU/DSA
port is 10M at the start. To fix that execute phylink_get_caps() callback
which fills port's mac_capabilities before they are processed.

Fixes: 3c783b83bd0f ("net: dsa: mv88e6xxx: get rid of SPEED_MAX setting")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 37b649501500..9fab76f256bb 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3293,7 +3293,12 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
* port and all DSA ports to their maximum bandwidth and full duplex.
*/
if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
- unsigned long caps = dp->pl_config.mac_capabilities;
+ unsigned long caps;
+
+ if (ds->ops->phylink_get_caps)
+ ds->ops->phylink_get_caps(ds, port, &dp->pl_config);
+
+ caps = dp->pl_config.mac_capabilities;

if (chip->info->ops->port_max_speed_mode)
mode = chip->info->ops->port_max_speed_mode(port);
--
2.29.0
\
 
 \ /
  Last update: 2022-07-14 03:02    [W:0.090 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site