lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [QUESTION] Exception print when enabling GICv4
Hi Xiang,

On Tue, 12 Jul 2022 13:55:16 +0100,
"chenxiang (M)" <chenxiang66@hisilicon.com> wrote:
>
> Hi,
> I encounter a issue related to GICv4 enable on ARM64 platform (kernel
> 5.19-rc4, qemu 6.2.0):
> We have a accelaration module whose VF has 3 MSI interrupts, and we
> passthrough it to virtual machine with following steps:
>
> echo 0000:79:00.1 > /sys/bus/pci/drivers/hisi_hpre/unbind
> echo vfio-pci >
> /sys/devices/pci0000\:78/0000\:78\:00.0/0000\:79\:00.1/driver_override
> echo 0000:79:00.1 > /sys/bus/pci/drivers_probe
>
> Then we boot VM with "-device vfio-pci,host=79:00.1,id=net0 \".
> When insmod the driver which registers 3 PCI MSI interrupts in VM,
> some exception print occur as following:
>
> vfio-pci 0000:3a:00.1: irq bypass producer (token 000000008f08224d)
> registration fails: 66311
>
> I find that bit[6:4] of register PCI_MSI_FLAGS is 2 (4 MSI interrupts)
> though we only register 3 PCI MSI interrupt,
>
> and only 3 MSI interrupt is activated at last.
> It allocates 4 vectors in function vfio_msi_enable() (qemu) as it
> reads the register PCI_MSI_FLAGS.
> Later it will call system call VFIO_DEVICE_SET_IRQS to set forwarding
> for those interrupts
> using function kvm_vgic_v4_set_forrwarding() as GICv4 is enabled. For
> interrupt 0~2, it success to set forwarding as they are already
> activated,
> but for the 4th interrupt, it is not activated, so ite is not found in
> function vgic_its_resolve_lpi(), so above printk occurs.
>
> It seems that we only allocate and activate 3 MSI interrupts in guest
> while it tried to set forwarding for 4 MSI interrupts in host.
> Do you have any idea about this issue?

I have a hunch: QEMU cannot know that the guest is only using 3 MSIs
out of the 4 that the device can use, and PCI/Multi-MSI only has a
single enable bit for all MSIs. So it probably iterates over all
possible MSIs and enable the forwarding. Since the guest has only
created 3 mappings in the virtual ITS, the last call fails. I would
expect the guest to still work properly though.

Thanks,

M.

--
Without deviation from the norm, progress is not possible.

\
 
 \ /
  Last update: 2022-07-12 17:27    [W:0.060 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site