lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/6] can: esd_usb: Improved behavior on esd CAN_ERROR_EXT event (3)
On Tue. 9 Jul. 2022 at 03:15, Frank Jungclaus <frank.jungclaus@esd.eu> wrote:
> Started a rework initiated by Vincents remark about "You should not
> report the greatest of txerr and rxerr but the one which actually
> increased." Now setting CAN_ERR_CRTL_[RT]X_WARNING and
> CAN_ERR_CRTL_[RT]X_PASSIVE depending on REC and TEC
>
> Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
> ---
> drivers/net/can/usb/esd_usb.c | 16 +++++++++++-----
> 1 file changed, 11 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/can/usb/esd_usb.c b/drivers/net/can/usb/esd_usb.c
> index 0a402a23d7ac..588caba1453b 100644
> --- a/drivers/net/can/usb/esd_usb.c
> +++ b/drivers/net/can/usb/esd_usb.c
> @@ -304,11 +304,17 @@ static void esd_usb_rx_event(struct esd_usb_net_priv *priv,
> /* Store error in CAN protocol (location) in data[3] */
> cf->data[3] = ecc & SJA1000_ECC_SEG;
>
> - if (priv->can.state == CAN_STATE_ERROR_WARNING ||
> - priv->can.state == CAN_STATE_ERROR_PASSIVE) {
> - cf->data[1] = (txerr > rxerr) ?
> - CAN_ERR_CRTL_TX_PASSIVE :
> - CAN_ERR_CRTL_RX_PASSIVE;
> + /* Store error status of CAN-controller in data[1] */
> + if (priv->can.state == CAN_STATE_ERROR_WARNING) {
> + if (txerr >= 96)
> + cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;

As far as I understand, those flags should be set only when the
threshold is *reached*:
https://elixir.bootlin.com/linux/latest/source/include/uapi/linux/can/error.h#L69

I don't think you should set it if the error state does not change.

Here, you probably want to compare the new value with the previous
one (stored in struct can_berr_counter) to decide whether or not the
flags should be set.


> + if (rxerr >= 96)
> + cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
> + } else if (priv->can.state == CAN_STATE_ERROR_PASSIVE) {
> + if (txerr >= 128)
> + cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
> + if (rxerr >= 128)
> + cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
> }
>
> cf->data[6] = txerr;
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-07-12 16:41    [W:0.648 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site