lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 5/5] dt-bindings: mmc: samsung,s3c6410-sdhci: convert to dtschema
On Sun, 26 Jun 2022 at 14:03, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> Convert the Samsung SoC SDHCI Controller bindings to DT schema.
>
> The original bindings were quite old and incomplete, so add during
> conversion typical (already used) properties like reg, clocks,
> interrupts.
>
> The bindings were not precising the clocks, although the upstream DTS
> and Linux driver were expecting bus clocks in certain patterns in any
> order. Document the status quo even though it is not a proper approach
> for bindings.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied for next, thanks!

Kind regards
Uffe


> ---
> .../bindings/mmc/samsung,s3c6410-sdhci.yaml | 81 +++++++++++++++++++
> .../devicetree/bindings/mmc/samsung-sdhci.txt | 32 --------
> 2 files changed, 81 insertions(+), 32 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
> delete mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
> new file mode 100644
> index 000000000000..5d873a60f650
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung SoC SDHCI Controller
> +
> +maintainers:
> + - Jaehoon Chung <jh80.chung@samsung.com>
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,s3c6410-sdhci
> + - samsung,exynos4210-sdhci
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + minItems: 2
> + maxItems: 5
> +
> + clock-names:
> + minItems: 2
> + items:
> + - const: hsmmc
> + - pattern: "^mmc_busclk.[0-3]$"
> + - pattern: "^mmc_busclk.[0-3]$"
> + - pattern: "^mmc_busclk.[0-3]$"
> + - pattern: "^mmc_busclk.[0-3]$"
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> +
> +allOf:
> + - $ref: mmc-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - samsung,exynos4210-sdhci
> + then:
> + properties:
> + clocks:
> + maxItems: 2
> + clock-names:
> + items:
> + - const: hsmmc
> + - const: mmc_busclk.2
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/exynos4.h>
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + mmc@12510000 {
> + compatible = "samsung,exynos4210-sdhci";
> + reg = <0x12510000 0x100>;
> + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
> + clock-names = "hsmmc", "mmc_busclk.2";
> + bus-width = <4>;
> + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
> + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
> + pinctrl-names = "default";
> + vmmc-supply = <&ldo21_reg>;
> + };
> diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> deleted file mode 100644
> index 42e0a9afa100..000000000000
> --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -* Samsung's SDHCI Controller device tree bindings
> -
> -Samsung's SDHCI controller is used as a connectivity interface with external
> -MMC, SD and eMMC storage mediums. This file documents differences between the
> -core mmc properties described by mmc.txt and the properties used by the
> -Samsung implementation of the SDHCI controller.
> -
> -Required SoC Specific Properties:
> -- compatible: should be one of the following
> - - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
> - controller.
> - - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
> - controller.
> -
> -Required Board Specific Properties:
> -- pinctrl-0: Should specify pin control groups used for this controller.
> -- pinctrl-names: Should contain only one value - "default".
> -
> -Example:
> - sdhci@12530000 {
> - compatible = "samsung,exynos4210-sdhci";
> - reg = <0x12530000 0x100>;
> - interrupts = <0 75 0>;
> - bus-width = <4>;
> - cd-gpios = <&gpk2 2 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
> - };
> -
> - Note: This example shows both SoC specific and board specific properties
> - in a single device node. The properties can be actually be separated
> - into SoC specific node and board specific node.
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2022-07-12 13:10    [W:0.140 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site