lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH RESEND] crypto: qat - fix indentation in ABI documentation
From
On 7/12/22 01:01, Giovanni Cabiddu wrote:
> @@ -47,14 +43,14 @@ Description: Reports the current configuration of the QAT device and allows
> The following example shows how to change the configuration of
> a device configured for running crypto services in order to
> run data compression:
> - # cat /sys/bus/pci/devices/<BDF>/qat/state
> - up
> - # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
> - sym;asym
> - # echo down > /sys/bus/pci/devices/<BDF>/qat/state
> - # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
> - # echo up > /sys/bus/pci/devices/<BDF>/qat/state
> - # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
> - dc
> + # cat /sys/bus/pci/devices/<BDF>/qat/state
> + up
> + # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
> + sym;asym
> + # echo down > /sys/bus/pci/devices/<BDF>/qat/state
> + # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
> + # echo up > /sys/bus/pci/devices/<BDF>/qat/state
> + # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
> + dc
>
> This attribute is only available for qat_4xxx devices.

Hi,

I think the culprit is just missing code block marker, which is added
above. Thanks.

--
An old man doll... just what I always wanted! - Clara

\
 
 \ /
  Last update: 2022-07-12 12:35    [W:0.050 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site