lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 07/14] cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
Date
[AMD Official Use Only - General]

Hi Nathan.

> -----Original Message-----
> From: Fontenot, Nathan <Nathan.Fontenot@amd.com>
> Sent: Tuesday, July 12, 2022 3:34 AM
> To: Yuan, Perry <Perry.Yuan@amd.com>; rafael.j.wysocki@intel.com;
> viresh.kumar@linaro.org; Huang, Ray <Ray.Huang@amd.com>
> Cc: Sharma, Deepak <Deepak.Sharma@amd.com>; Limonciello, Mario
> <Mario.Limonciello@amd.com>; Fontenot, Nathan
> <Nathan.Fontenot@amd.com>; Deucher, Alexander
> <Alexander.Deucher@amd.com>; Su, Jinzhou (Joe) <Jinzhou.Su@amd.com>;
> Huang, Shimmer <Shimmer.Huang@amd.com>; Du, Xiaojian
> <Xiaojian.Du@amd.com>; Meng, Li (Jassmine) <Li.Meng@amd.com>; linux-
> pm@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v2 07/14] cpufreq: amd_pstate: map desired perf into
> pstate scope for powersave governor
>
> On 7/9/22 09:19, Perry Yuan wrote:
> > The patch will fix the invalid desired perf value for powersave
> > governor. This issue is found when testing on one AMD EPYC system, the
> > actual des_perf is smaller than the min_perf value, that is invalid
> > value. because the min_perf is the lowest_perf system can support in
> > idle state.
> >
> > Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
> > ---
> > drivers/cpufreq/amd-pstate.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/cpufreq/amd-pstate.c
> > b/drivers/cpufreq/amd-pstate.c index 7c51f4125263..8a2b6ad9b8c0
> 100644
> > --- a/drivers/cpufreq/amd-pstate.c
> > +++ b/drivers/cpufreq/amd-pstate.c
> > @@ -265,6 +265,7 @@ static void amd_pstate_update(struct
> amd_cpudata *cpudata, u32 min_perf,
> > u64 prev = READ_ONCE(cpudata->cppc_req_cached);
> > u64 value = prev;
> >
> > + des_perf = clamp_t(unsigned long, des_perf, min_perf, max_perf);
>
> You should also update amd_pstate_adjust_perf() to remove the clamp_t()
> call now that it is done here.
>
> -Nathan

I missed that, changed into V3.
Thank you!

Perry.
>
> > value &= ~AMD_CPPC_MIN_PERF(~0L);
> > value |= AMD_CPPC_MIN_PERF(min_perf);
> >
\
 
 \ /
  Last update: 2022-07-12 11:29    [W:1.881 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site