lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
Date
If soft disconnect is in progress, allow the endxfer command to be sent,
without this, there is an issue where the stop active transfer call
(during pullup disable) wouldn't actually issue the endxfer command,
while clearing the DEP flag.

In addition, if the DWC3_EP_DELAY_STOP flag was set before soft disconnect
started (i.e. from the dequeue path), ensure that when the EP0 transaction
completes during soft disconnect, to issue the endxfer with the force
parameter set, as it does not expect a command complete event.

Fixes: e4cf6580ac740 ("usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue")
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
Link:
https://lore.kernel.org/linux-usb/1a1a5485-790e-79ce-f5a6-1e96d9b49a47@synopsys.com/

drivers/usb/dwc3/ep0.c | 3 +--
drivers/usb/dwc3/gadget.c | 5 ++++-
2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 506ef717fdc0..5851b0e9db0a 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -290,8 +290,7 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
continue;

- dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
- dwc3_stop_active_transfer(dwc3_ep, true, true);
+ dwc3_stop_active_transfer(dwc3_ep, true, dwc->connected);
}
}

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index ee85b773e3fe..41b7007358de 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1693,6 +1693,7 @@ static int __dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool int
dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
else if (!ret)
dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
+ dep->flags &= ~DWC3_EP_DELAY_STOP;

return ret;
}
@@ -3686,8 +3687,10 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
return;

+ if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
+ return;
+
if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
- (dep->flags & DWC3_EP_DELAY_STOP) ||
(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
return;

\
 
 \ /
  Last update: 2022-07-13 02:36    [W:0.051 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site