lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/5] usb: dwc3: Allow end transfer commands to be sent during soft disconnect
From
Hi Thinh,

On 7/8/2022 6:58 PM, Thinh Nguyen wrote:
> On 7/8/2022, Wesley Cheng wrote:
>> If soft disconnect is in progress, allow the endxfer command to be sent,
>> without this, there is an issue where the stop active transfer call
>> (during pullup disable) wouldn't actually issue the endxfer command,
>> while clearing the DEP flag.
>>
>> In addition, if the DWC3_EP_DELAY_STOP flag was set before soft disconnect
>> started (i.e. from the dequeue path), ensure that when the EP0 transaction
>> completes during soft disconnect, to issue the endxfer with the force
>> parameter set, as it does not expect a command complete event.
>>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> ---
>> drivers/usb/dwc3/ep0.c | 3 +--
>> drivers/usb/dwc3/gadget.c | 5 ++++-
>> 2 files changed, 5 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
>> index 506ef717fdc0..5851b0e9db0a 100644
>> --- a/drivers/usb/dwc3/ep0.c
>> +++ b/drivers/usb/dwc3/ep0.c
>> @@ -290,8 +290,7 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
>> if (!(dwc3_ep->flags & DWC3_EP_DELAY_STOP))
>> continue;
>>
>> - dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP;
>> - dwc3_stop_active_transfer(dwc3_ep, true, true);
>> + dwc3_stop_active_transfer(dwc3_ep, true, dwc->connected);
>> }
>> }
>>
>> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
>> index bd40608b19df..fba2797ad9ae 100644
>> --- a/drivers/usb/dwc3/gadget.c
>> +++ b/drivers/usb/dwc3/gadget.c
>> @@ -3696,8 +3696,10 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
>> if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE)
>> return;
>>
>> + if (interrupt && (dep->flags & DWC3_EP_DELAY_STOP))
>> + return;
>> +
>> if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) ||
>> - (dep->flags & DWC3_EP_DELAY_STOP) ||
>> (dep->flags & DWC3_EP_END_TRANSFER_PENDING))
>> return;
>>
>> @@ -3744,6 +3746,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
>> __dwc3_stop_active_transfer(dep, force, interrupt);
>> spin_lock(&dwc->lock);
>>
>> + dep->flags &= ~DWC3_EP_DELAY_STOP;
>
> Can we clear this flag in __dwc3_stop_active_transfer(). It should apply
> if End Transfer command was sent.

I wanted to make sure that we weren't modifying the DEP flags outside of
a spin lock. Patch#3 modifies it where we unlock before calling
__dwc3_stop_active_transfer(), so we can allow the dwc3 threaded IRQ
handle events while the cmd status polling happens.

Maybe we can unlock/lock the dwc3->lock inside
__dwc3_stop_active_transfer() and that way we can ensure DEP flags are
modified properly?

Thanks
Wesley Cheng

\
 
 \ /
  Last update: 2022-07-13 00:11    [W:0.072 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site