lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/2] dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation
Hi Krzysztof,

Thanks for your clarifications.

On Tue, 12 Jul 2022 at 16:45, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 12/07/2022 15:29, Tomer Maimon wrote:
> > Hi Krzysztof,
> >
> > Thanks for your comments.
> >
> > On Tue, 12 Jul 2022 at 12:48, Krzysztof Kozlowski
> > <krzysztof.kozlowski@linaro.org> wrote:
> >>
> >> On 10/07/2022 12:21, Tomer Maimon wrote:
> >>> Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX
> >>> pinmux and GPIO controller.
> >>>
> >>> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> >>> ---
> >>> .../pinctrl/nuvoton,npcm845-pinctrl.yaml | 205 ++++++++++++++++++
> >>> 1 file changed, 205 insertions(+)
> >>> create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> >>> new file mode 100644
> >>> index 000000000000..6395ef2bf5b3
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> >>> @@ -0,0 +1,205 @@
> >>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: Nuvoton NPCM845 Pin Controller and GPIO
> >>> +
> >>> +maintainers:
> >>> + - Tomer Maimon <tmaimon77@gmail.com>
> >>> +
> >>> +description:
> >>> + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through
> >>> + the multiplexing block, Each pin supports GPIO functionality (GPIOx)
> >>> + and multiple functions that directly connect the pin to different
> >>> + hardware blocks.
> >>> +
> >>> +properties:
> >>> + compatible:
> >>> + const: nuvoton,npcm845-pinctrl
> >>> +
> >>> + ranges:
> >>> + maxItems: 1
> >>
> >> ranges without reg? Does it even work? Did you test the bindings?
> > The ranges related to GPIO node reg
>
> But you do not allow here a 'reg', do you? So how can you have an unit
> address in pinctrl node?
I allow the reg unit address in the GPIO node.
This is why reg is in the GPIO node as follow:

compatible = "nuvoton,npcm845-pinctrl";
ranges = <0x0 0x0 0xf0010000 0x8000>;
#address-cells = <1>;
#size-cells = <1>;
status = "okay";
gpio0: gpio@f0010000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0xB0>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
gpio1: gpio@f0011000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0xB0>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 32 32>;
};
gpio2: gpio@f0012000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0xB0>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 64 32>;
};
...
Is it problematic?

>
> >
> > I did test the pin controller document and it passed.
> > bash-4.2$ make ARCH=arm64 dt_binding_check
> > DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml
> > LINT Documentation/devicetree/bindings
> > CHKDT Documentation/devicetree/bindings/processed-schema.json
> > SCHEMA Documentation/devicetree/bindings/processed-schema.json
> > DTEX Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.example.dts
> > DTC Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.example.dtb
> > CHECK Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.example.dtb
> > Did I need to run anything else than dt_binding_check for testing the document?
>
> Indeed it will pass, because you do not have reg in pinctrl node. But
> your dts won't pass make dtbs W=1
After running make ARCH=arm64 dtbs W=1 I don't see warning related to pinctrl
bash-4.2$ make ARCH=arm64 dtbs W=1
DTC arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dtb
arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi:69.7-183.5:
Warning (unit_address_vs_reg): /ahb/apb: node has a reg or ranges
property, but no unit name
arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts:20.9-22.4: Warning
(unit_address_vs_reg): /memory: node has a reg or ranges property, but
no unit name
arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi:69.7-183.5:
Warning (simple_bus_reg): /ahb/apb: simple-bus unit address format
error, expected "f0000000"
arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi:56.35-61.5:
Warning (unique_unit_address): /ahb/reset-controller@f0801000:
duplicate unit-address (also used in node
/ahb/clock-controller@f0801000)
I did got warning but it dont related to the pinctrl, Maybe I didn't
run the test correct?
>
>
> >>
> >>> +
> >>> + '#address-cells':
> >>> + const: 1
> >>> +
> >>> + '#size-cells':
> >>> + const: 1
> >>> +
> >>> +patternProperties:
> >>> + "^gpio@":
> >>> + type: object
> >>> +
> >>> + description:
> >>> + Eight GPIO banks that each contain between 32 GPIOs.
> >>> +
> >>> + properties:
> >>> +
> >>
> >> No blank line.
> > O.K.
> >>
> >>> + gpio-controller: true
> >>> +
> >>> + '#gpio-cells':
> >>> + const: 2
> >>> +
> >>> + reg:
> >>> + maxItems: 1
> >>> +
> >>> + interrupts:
> >>> + maxItems: 1
> >>> +
> >>> + gpio-ranges:
> >>> + maxItems: 1
> >>> +
> >>> + required:
> >>> + - gpio-controller
> >>> + - '#gpio-cells'
> >>> + - reg
> >>> + - interrupts
> >>> + - gpio-ranges
> >>> +
> >>> + "-pin":
> >>> + $ref: pinmux-node.yaml#
> >>
> >> Shouldn't this be under bank?
> > Do you mean after the group and function properties?
> > The -pin shouldn't use for the group property naming?
>
> Hm, I guess it's fine, I actually don't remember the recommendation for
> gpio banks in relation to pinmux nodes.
>
> >>
> >>> +
> >>> + properties:
> >>> + groups:
> >>> + description:
> >>> + One or more groups of pins to mux to a certain function
> >>> + items:
> >>> + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> >>> + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> >>> + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> >>> + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> >>> + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> >>> + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> >>> + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> >>> + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> >>> + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> >>> + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> >>> + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> >>> + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> >>> + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> >>> + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> >>> + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> >>> + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> >>> + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> >>> + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> >>> + hgpio4, hgpio5, hgpio6, hgpio7 ]
> >>> +
> >>> + function:
> >>> + description:
> >>> + The function that a group of pins is muxed to
> >>> + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi,
> >>> + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b,
> >>> + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21,
> >>> + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1,
> >>> + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2,
> >>> + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen,
> >>> + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4,
> >>> + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11,
> >>> + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3,
> >>> + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1,
> >>> + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5,
> >>> + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9,
> >>> + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8,
> >>> + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout,
> >>> + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1,
> >>> + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b,
> >>> + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12,
> >>> + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3,
> >>> + hgpio4, hgpio5, hgpio6, hgpio7 ]
> >>> +
> >>> + dependencies:
> >>> + groups: [ function ]
> >>> + function: [ groups ]
> >>> +
> >>> + additionalProperties: false
> >>> +
> >>> + "^pin":
> >>
> >> This is almost the same as previous property. Confusing and I think it
> >> does not work.
> > if I remove it I get the following error:
> > pinctrl@f0800000: 'pin34-slew' does not match any of the regexes:
> > '-pin', '^gpio@', 'pinctrl-[0-9]+'
> > Can you advise what I should do?
>
> Ah, the pattern is indeed different - you start with pin. Anyway it's
> confusing to have cfg starting with pin and mux ending in pin. How
> "pin-pin" would work? :)
>
> Use maybe similar pattern, so start with mux for mux and pin for cfg.
> Look at wpcm450 pinctrl.
It indeed confusing, I will work with different naming.
>
>
> >>
> >>> + $ref: pincfg-node.yaml#
> >>> +
> >>> + properties:
> >>> + pins:
> >>> + description:
> >>> + A list of pins to configure in certain ways, such as enabling
> >>> + debouncing
> >>> +
> >>> + bias-disable: true
> >>> +
> >>> + bias-pull-up: true
> >>> +
> >>> + bias-pull-down: true
> >>> +
> >>> + input-enable: true
> >>> +
> >>> + output-low: true
> >>> +
> >>> + output-high: true
> >>> +
> >>> + drive-push-pull: true
> >>> +
> >>> + drive-open-drain: true
> >>> +
> >>> + input-debounce:
> >>> + description:
> >>> + Debouncing periods in microseconds, one period per interrupt
> >>> + bank found in the controller
> >>> + $ref: /schemas/types.yaml#/definitions/uint32-array
> >>> + minItems: 1
> >>> + maxItems: 4
> >>> +
> >>> + slew-rate:
> >>> + description: |
> >>> + 0: Low rate
> >>> + 1: High rate
> >>> + $ref: /schemas/types.yaml#/definitions/uint32
> >>> + enum: [0, 1]
> >>> +
> >>> + drive-strength:
> >>> + enum: [ 0, 1, 2, 4, 8, 12 ]
> >>> +
> >>> + additionalProperties: false
> >>> +
> >>> +required:
> >>> + - compatible
> >>> + - ranges
> >>> + - '#address-cells'
> >>> + - '#size-cells'
> >>
> >> Missing allOf with ref to pinctrl.yaml.
> > Do you mean adding
> > allOf:
> > - $ref: "pinctrl.yaml#"
>
> Yes.
>
>
>
> Best regards,
> Krzysztof

Best regards,

Tomer

\
 
 \ /
  Last update: 2022-07-12 20:53    [W:0.366 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site