lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 068/130] kvm/emulate: Fix SETcc emulation function offsets with SLS
Date
From: Borislav Petkov <bp@suse.de>

commit fe83f5eae432ccc8e90082d6ed506d5233547473 upstream.

The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.

The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.

However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:

15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3

and this explodes like this:

int3: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 2435 Comm: qemu-system-x86 Not tainted 5.17.0-rc8-sls #1
Hardware name: Dell Inc. Precision WorkStation T3400 /0TP412, BIOS A14 04/30/2012
RIP: 0010:setc+0x5/0x8 [kvm]
Code: 00 00 0f 1f 00 0f b6 05 43 24 06 00 c3 cc 0f 1f 80 00 00 00 00 0f 90 c0 c3 cc 0f \
1f 00 0f 91 c0 c3 cc 0f 1f 00 0f 92 c0 c3 cc <0f> 1f 00 0f 93 c0 c3 cc 0f 1f 00 \
0f 94 c0 c3 cc 0f 1f 00 0f 95 c0
Call Trace:
<TASK>
? x86_emulate_insn [kvm]
? x86_emulate_instruction [kvm]
? vmx_handle_exit [kvm_intel]
? kvm_arch_vcpu_ioctl_run [kvm]
? kvm_vcpu_ioctl [kvm]
? __x64_sys_ioctl
? do_syscall_64
? entry_SYSCALL_64_after_hwframe
</TASK>

Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.

Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Jamie Heilman <jamie@audible.transient.net>
Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/kvm/emulate.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -428,8 +428,23 @@ static int fastop(struct x86_emulate_ctx
FOP_END

/* Special case for SETcc - 1 instruction per cc */
+
+/*
+ * Depending on .config the SETcc functions look like:
+ *
+ * SETcc %al [3 bytes]
+ * RET [1 byte]
+ * INT3 [1 byte; CONFIG_SLS]
+ *
+ * Which gives possible sizes 4 or 5. When rounded up to the
+ * next power-of-two alignment they become 4 or 8.
+ */
+#define SETCC_LENGTH (4 + IS_ENABLED(CONFIG_SLS))
+#define SETCC_ALIGN (4 << IS_ENABLED(CONFIG_SLS))
+static_assert(SETCC_LENGTH <= SETCC_ALIGN);
+
#define FOP_SETCC(op) \
- ".align 4 \n\t" \
+ ".align " __stringify(SETCC_ALIGN) " \n\t" \
".type " #op ", @function \n\t" \
#op ": \n\t" \
#op " %al \n\t" \
@@ -1055,7 +1070,7 @@ static int em_bsr_c(struct x86_emulate_c
static __always_inline u8 test_cc(unsigned int condition, unsigned long flags)
{
u8 rc;
- void (*fop)(void) = (void *)em_setcc + 4 * (condition & 0xf);
+ void (*fop)(void) = (void *)em_setcc + SETCC_ALIGN * (condition & 0xf);

flags = (flags & EFLAGS_MASK) | X86_EFLAGS_IF;
asm("push %[flags]; popf; " CALL_NOSPEC

\
 
 \ /
  Last update: 2022-07-12 20:50    [W:1.564 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site