lkml.org 
[lkml]   [2022]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC 1/2] dt-bindings: interrupt-controller: sifive,plic: Document Renesas RZ/Five SoC
On Thu, Jul 07, 2022 at 10:51:33AM +0100, Marc Zyngier wrote:
> On Wed, 06 Jul 2022 22:58:27 +0100,
> Rob Herring <robh@kernel.org> wrote:
> >
> > On Fri, Jun 24, 2022 at 10:59:40AM +0100, Lad, Prabhakar wrote:
> > > Hi Rob,
> > >
> > > Thank you for the review.
> > >
> > > On Sun, Jun 5, 2022 at 3:23 PM Rob Herring <robh@kernel.org> wrote:
> > > >
> > > > On Tue, May 24, 2022 at 06:22:13PM +0100, Lad Prabhakar wrote:
> > > > > Document Renesas RZ/Five (R9A07G043) SoC.
> > > > >
> > > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > > > ---
> > > > > .../sifive,plic-1.0.0.yaml | 38 +++++++++++++++++--
> > > > > 1 file changed, 35 insertions(+), 3 deletions(-)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > index 27092c6a86c4..78ff31cb63e5 100644
> > > > > --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > > > @@ -28,7 +28,10 @@ description:
> > > > >
> > > > > While the PLIC supports both edge-triggered and level-triggered interrupts,
> > > > > interrupt handlers are oblivious to this distinction and therefore it is not
> > > > > - specified in the PLIC device-tree binding.
> > > > > + specified in the PLIC device-tree binding for SiFive PLIC (and similar PLIC's),
> > > > > + but for the Renesas RZ/Five Soc (AX45MP AndesCore) which has NCEPLIC100 we need
> > > > > + to specify the interrupt type as the flow for EDGE interrupts is different
> > > > > + compared to LEVEL interrupts.
> > > > >
> > > > > While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
> > > > > "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
> > > > > @@ -57,6 +60,7 @@ properties:
> > > > > - enum:
> > > > > - allwinner,sun20i-d1-plic
> > > > > - const: thead,c900-plic
> > > > > + - const: renesas-r9a07g043-plic
> >
> > Also, this should be 'renesas,r9...'
> >
> > > > >
> > > > > reg:
> > > > > maxItems: 1
> > > > > @@ -64,8 +68,7 @@ properties:
> > > > > '#address-cells':
> > > > > const: 0
> > > > >
> > > > > - '#interrupt-cells':
> > > > > - const: 1
> > > > > + '#interrupt-cells': true
> > > > >
> > > > > interrupt-controller: true
> > > > >
> > > > > @@ -91,6 +94,35 @@ required:
> > > > > - interrupts-extended
> > > > > - riscv,ndev
> > > > >
> > > > > +if:
> > > > > + properties:
> > > > > + compatible:
> > > > > + contains:
> > > > > + const: renesas-r9a07g043-plic
> > > > > +then:
> > > > > + properties:
> > > > > + clocks:
> > > > > + maxItems: 1
> > > > > +
> > > > > + resets:
> > > > > + maxItems: 1
> > > > > +
> > > > > + power-domains:
> > > > > + maxItems: 1
> > > >
> > > > Did you test this? The above properties won't be allowed because of
> > > > additionalProperties below. You need to change it to
> > > > 'unevaluatedProperties' or move these to the top level.
> > > >
> > > Yes I have run the dt_binding check.
> > >
> > > So with the below diff it does complain about the missing properties.
> > >
> > > prasmi@prasmi:~/work/renasas/renesas-drivers$ git diff
> > > Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > index 20ded037d444..bb14a4b1ec0a 100644
> > > --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > @@ -130,7 +130,7 @@ examples:
> > > plic: interrupt-controller@c000000 {
> > > #address-cells = <0>;
> > > #interrupt-cells = <1>;
> > > - compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
> > > + compatible = "renesas-r9a07g043-plic";
> > > interrupt-controller;
> > > interrupts-extended = <&cpu0_intc 11>,
> > > <&cpu1_intc 11>, <&cpu1_intc 9>,
> > > prasmi@prasmi:~/work/renasas/renesas-drivers$ make ARCH=riscv
> > > CROSS_COMPILE=riscv64-linux-gnu- dt_binding_check
> > > LINT Documentation/devicetree/bindings
> > > CHKDT Documentation/devicetree/bindings/processed-schema.json
> > > SCHEMA Documentation/devicetree/bindings/processed-schema.json
> > > DTEX Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dts
> > > DTC Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb
> > > CHECK Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> > > interrupt-controller@c000000: #interrupt-cells:0:0: 2 was expected
> > > From schema:
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> > > interrupt-controller@c000000: 'clocks' is a required property
> > > From schema:
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> > > interrupt-controller@c000000: 'resets' is a required property
> > > From schema:
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.example.dtb:
> > > interrupt-controller@c000000: 'power-domains' is a required property
> > > From schema:
> > > /home/prasmi/work/renasas/renesas-drivers/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
> > > prasmi@prasmi:~/work/renasas/renesas-drivers$
> > > prasmi@prasmi:~/work/renasas/renesas-drivers$
> > >
> > > Is there something I'm missing here?
> >
> > You've said these properties are required, but you didn't add them.
> >
> > If you don't have the above 3 properties, then it's not going to
> > complain that they are present. But it will when you do add them for the
> > reason I gave.
>
> Can you please have a look at the latest instance[1][2] of this
> series, as posted by Samuel? I've provisionally queued it, but only on
> the provision that you would eventually ack these patches.

I did already[1]. They passed checks, were already in linux-next, and I
didn't see anything major needing comments, so I marked it N/A (meaning
someone else applies it) without comment.

Rob

[1] https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20220630100241.35233-2-samuel@sholland.org/

\
 
 \ /
  Last update: 2022-07-12 20:20    [W:0.174 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site