lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 2/3] dt-binding: power: power-domain: add power-supply-needs-irq
Date
Add the power-supply-needs-irq board description property for power domains.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../devicetree/bindings/power/power-domain.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index 889091b9814f..e82c2f7ccb97 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -70,6 +70,16 @@ properties:
by the given provider should be subdomains of the domain specified
by this binding.

+ power-supply: true
+
+ power-supply-needs-irq:
+ type: boolean
+ description:
+ A power-supply can link for example to a regulator controlled via
+ i2c or otherwise needing interrupts enabled to be able to enable and
+ disable. This property makes various callbacks usually run in the
+ noirq phase, being run when interrupts are available.
+
required:
- "#power-domain-cells"

--
2.30.2
\
 
 \ /
  Last update: 2022-07-11 12:37    [W:0.071 / U:0.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site