lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/6] media: dt-bindings: ov5693: document YAML binding
Hi Tommaso, Krzysztof,

This has been reviewed by Krzysztof already, so I guess it's fine,
but let me ask anyway

On Thu, Jun 30, 2022 at 03:48:34PM +0200, Tommaso Merciai wrote:
> Add documentation of device tree in YAML schema for the OV5693
> CMOS image sensor from Omnivision
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> Changes since v1:
> - Fix allOf position as suggested by Krzysztof
> - Remove port description as suggested by Krzysztof
> - Fix EOF as suggested by Krzysztof
>
> Changes since v2:
> - Fix commit body as suggested by Krzysztof
>
> Changes since v3:
> - Add reviewed-by tags, suggested by Jacopo, Krzysztof
>
> Changes since v4:
> - Remove wrong Sakari reviewed-by tag, suggested by Krzysztof, Sakari
>
> .../bindings/media/i2c/ovti,ov5693.yaml | 106 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 107 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> new file mode 100644
> index 000000000000..b83c9fc04023
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2022 Amarulasolutions
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Omnivision OV5693 CMOS Sensor
> +
> +maintainers:
> + - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> +
> +description: |
> + The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
> + image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> + sub-sampled, and windowed 10-bit MIPI images in various formats via the
> + Serial Camera Control Bus (SCCB) interface.
> +
> + OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
> + The sensor output is available via CSI-2 serial data output (up to 2-lane).
> +
> +allOf:
> + - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> + compatible:
> + const: ovti,ov5693
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description:
> + System input clock (aka XVCLK). From 6 to 27 MHz.
> + maxItems: 1
> +
> + dovdd-supply:
> + description:
> + Digital I/O voltage supply, 1.8V.
> +
> + avdd-supply:
> + description:
> + Analog voltage supply, 2.8V.
> +
> + dvdd-supply:
> + description:
> + Digital core voltage supply, 1.2V.
> +
> + reset-gpios:
> + description:
> + The phandle and specifier for the GPIO that controls sensor reset.
> + This corresponds to the hardware pin XSHUTDN which is physically
> + active low.
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - dovdd-supply
> + - avdd-supply
> + - dvdd-supply

Should supplies be made mandatory ? Sensors are often powered by fixed
rails. Do we want DTS writers to create "fixed-regulators" for all of
them ? The fact the regulator framework creates dummies if there's no
entry in .dts for a regulator makes me think it's fine to have them
optional, but I understand how Linux works should not be an indication
of how a bindings should look like.

> + - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/px30-cru.h>
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/pinctrl/rockchip.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ov5693: camera@36 {
> + compatible = "ovti,ov5693";
> + reg = <0x36>;
> +
> + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cif_clkout_m0>;
> +
> + clocks = <&cru SCLK_CIF_OUT>;
> + assigned-clocks = <&cru SCLK_CIF_OUT>;
> + assigned-clock-rates = <19200000>;
> +
> + avdd-supply = <&vcc_1v8>;
> + dvdd-supply = <&vcc_1v2>;
> + dovdd-supply = <&vcc_2v8>;
> +
> + rotation = <90>;
> + orientation = <0>;
> +
> + port {
> + ucam_out: endpoint {
> + remote-endpoint = <&mipi_in_ucam>;
> + data-lanes = <1 2>;
> + link-frequencies = /bits/ 64 <450000000>;
> + };
> + };
> + };
> + };
> +
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1fc9ead83d2a..844307cb20c4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14719,6 +14719,7 @@ M: Daniel Scally <djrscally@gmail.com>
> L: linux-media@vger.kernel.org
> S: Maintained
> T: git git://linuxtv.org/media_tree.git
> +F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> F: drivers/media/i2c/ov5693.c
>
> OMNIVISION OV5695 SENSOR DRIVER
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-07-11 12:25    [W:0.107 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site