lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 009/230] can: gs_usb: gs_usb_open/close(): fix memory leak
Date
From: Rhett Aultman <rhett.aultman@samsara.com>

commit 2bda24ef95c0311ab93bda00db40486acf30bd0a upstream.

The gs_usb driver appears to suffer from a malady common to many USB
CAN adapter drivers in that it performs usb_alloc_coherent() to
allocate a number of USB request blocks (URBs) for RX, and then later
relies on usb_kill_anchored_urbs() to free them, but this doesn't
actually free them. As a result, this may be leaking DMA memory that's
been used by the driver.

This commit is an adaptation of the techniques found in the esd_usb2
driver where a similar design pattern led to a memory leak. It
explicitly frees the RX URBs and their DMA memory via a call to
usb_free_coherent(). Since the RX URBs were allocated in the
gs_can_open(), we remove them in gs_can_close() rather than in the
disconnect function as was done in esd_usb2.

For more information, see the 928150fad41b ("can: esd_usb2: fix memory
leak").

Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/can/usb/gs_usb.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -185,6 +185,8 @@ struct gs_can {

struct usb_anchor tx_submitted;
atomic_t active_tx_urbs;
+ void *rxbuf[GS_MAX_RX_URBS];
+ dma_addr_t rxbuf_dma[GS_MAX_RX_URBS];
};

/* usb interface struct */
@@ -594,6 +596,7 @@ static int gs_can_open(struct net_device
for (i = 0; i < GS_MAX_RX_URBS; i++) {
struct urb *urb;
u8 *buf;
+ dma_addr_t buf_dma;

/* alloc rx urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -604,7 +607,7 @@ static int gs_can_open(struct net_device
buf = usb_alloc_coherent(dev->udev,
sizeof(struct gs_host_frame),
GFP_KERNEL,
- &urb->transfer_dma);
+ &buf_dma);
if (!buf) {
netdev_err(netdev,
"No memory left for USB buffer\n");
@@ -612,6 +615,8 @@ static int gs_can_open(struct net_device
return -ENOMEM;
}

+ urb->transfer_dma = buf_dma;
+
/* fill, anchor, and submit rx urb */
usb_fill_bulk_urb(urb,
dev->udev,
@@ -635,10 +640,17 @@ static int gs_can_open(struct net_device
rc);

usb_unanchor_urb(urb);
+ usb_free_coherent(dev->udev,
+ sizeof(struct gs_host_frame),
+ buf,
+ buf_dma);
usb_free_urb(urb);
break;
}

+ dev->rxbuf[i] = buf;
+ dev->rxbuf_dma[i] = buf_dma;
+
/* Drop reference,
* USB core will take care of freeing it
*/
@@ -703,13 +715,20 @@ static int gs_can_close(struct net_devic
int rc;
struct gs_can *dev = netdev_priv(netdev);
struct gs_usb *parent = dev->parent;
+ unsigned int i;

netif_stop_queue(netdev);

/* Stop polling */
parent->active_channels--;
- if (!parent->active_channels)
+ if (!parent->active_channels) {
usb_kill_anchored_urbs(&parent->rx_submitted);
+ for (i = 0; i < GS_MAX_RX_URBS; i++)
+ usb_free_coherent(dev->udev,
+ sizeof(struct gs_host_frame),
+ dev->rxbuf[i],
+ dev->rxbuf_dma[i]);
+ }

/* Stop sending URBs */
usb_kill_anchored_urbs(&dev->tx_submitted);

\
 
 \ /
  Last update: 2022-07-11 11:43    [W:0.566 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site