lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 1/5] dt-bindings: interconnect: Update property for icc-rpm path tag
Date
To support path tag in icc-rpm driver, the "#interconnect-cells"
property is updated as enumerate values: 1 or 2. Setting to 1 means
it is compatible with old DT binding that interconnect path only
contains node id; if set to 2 for "#interconnect-cells" property, then
the second specifier is used as a tag (e.g. vote for which buckets).

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/interconnect/qcom,rpm.yaml | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 8a676fef8c1d..4b37aa88a375 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -45,7 +45,11 @@ properties:
- qcom,sdm660-snoc

'#interconnect-cells':
- const: 1
+ description: |
+ Value: <1> is one cell in an interconnect specifier for the
+ interconnect node id, <2> requires the interconnect node id and an
+ extra path tag.
+ enum: [ 1, 2 ]

clocks:
minItems: 2
--
2.25.1
\
 
 \ /
  Last update: 2022-07-12 04:00    [W:0.040 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site