lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: dwc3: ep0: Properly handle setup_packet_pending scenario in data stage
Date
During a 3 stage SETUP transfer, if the host sends another SETUP token
before completing the status phase, it signifies that the host has aborted
the current control transfer. Currently, if a setup_packet_pending is
received, there are no subsequent calls to dwc3_ep0_out_start() to fetch
the new SETUP packet. This leads to a stall on EP0, as host does not
expect another STATUS phase as it has aborted the current transfer.

Fix this issue by explicitly stalling and restarting EP0, as well as
resetting the trb_enqueue indexes. (without this, there is a chance the
SETUP TRB is set up on trb_endqueue == 1)

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
drivers/usb/dwc3/ep0.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 5851b0e9db0a..e64ad9ce6e30 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -239,6 +239,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
dwc3_gadget_giveback(dep, req, -ECONNRESET);
}

+ dwc->eps[0]->trb_enqueue = 0;
+ dwc->eps[1]->trb_enqueue = 0;
dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
@@ -1141,6 +1143,11 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
return;

+ if (dwc->setup_packet_pending) {
+ dwc3_ep0_stall_and_restart(dwc);
+ return;
+ }
+
dwc->ep0state = EP0_STATUS_PHASE;

if (dwc->delayed_status) {
\
 
 \ /
  Last update: 2022-07-12 03:45    [W:0.028 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site