lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] mtd: rawnand: brcmnand: Move Kconfig to driver folder
Date
In preparation for allowing each of the brcmnand stub to be built
separately, move the Kconfig entry to the driver folder.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/mtd/nand/raw/Kconfig | 22 +---------------------
drivers/mtd/nand/raw/brcmnand/Kconfig | 21 +++++++++++++++++++++
2 files changed, 22 insertions(+), 21 deletions(-)
create mode 100644 drivers/mtd/nand/raw/brcmnand/Kconfig

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 8b6d7a515445..43a151b4c8fc 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -200,27 +200,7 @@ config MTD_NAND_TMIO
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.

-config MTD_NAND_BRCMNAND
- tristate "Broadcom STB NAND controller"
- depends on ARM || ARM64 || MIPS || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Enables the Broadcom NAND controller driver. The controller was
- originally designed for Set-Top Box but is used on various BCM7xxx,
- BCM3xxx, BCM63xxx, iProc/Cygnus and more.
-
-if MTD_NAND_BRCMNAND
-
-config MTD_NAND_BRCMNAND_BCMA
- tristate "Broadcom BCMA NAND controller"
- depends on BCMA_NFLASH
- depends on BCMA
- help
- Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
- The glue driver will take care of performing the low-level I/O
- operations to interface the BRCMNAND controller over the BCMA bus.
-
-endif # MTD_NAND_BRCMNAND
+source "drivers/mtd/nand/raw/brcmnand/Kconfig"

config MTD_NAND_BCM47XXNFLASH
tristate "BCM4706 BCMA NAND controller"
diff --git a/drivers/mtd/nand/raw/brcmnand/Kconfig b/drivers/mtd/nand/raw/brcmnand/Kconfig
new file mode 100644
index 000000000000..d5a0265525ca
--- /dev/null
+++ b/drivers/mtd/nand/raw/brcmnand/Kconfig
@@ -0,0 +1,21 @@
+config MTD_NAND_BRCMNAND
+ tristate "Broadcom STB NAND controller"
+ depends on ARM || ARM64 || MIPS || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Enables the Broadcom NAND controller driver. The controller was
+ originally designed for Set-Top Box but is used on various BCM7xxx,
+ BCM3xxx, BCM63xxx, iProc/Cygnus and more.
+
+if MTD_NAND_BRCMNAND
+
+config MTD_NAND_BRCMNAND_BCMA
+ tristate "Broadcom BCMA NAND controller"
+ depends on BCMA_NFLASH
+ depends on BCMA
+ help
+ Enables the BRCMNAND controller over BCMA on BCM47186/BCM5358 SoCs.
+ The glue driver will take care of performing the low-level I/O
+ operations to interface the BRCMNAND controller over the BCMA bus.
+
+endif # MTD_NAND_BRCMNAND
--
2.25.1
\
 
 \ /
  Last update: 2022-07-12 00:26    [W:0.361 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site