lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] MMIO should have more priority then IO
Date

On 11/07/22, 10:34 PM, "Nadav Amit" <namit@vmware.com> wrote:

> On Jul 10, 2022, at 11:31 PM, Ajay Kaher <akaher@vmware.com> wrote:
>
> During boot-time there are many PCI reads. Currently, when these reads are
> performed by a virtual machine, they all cause a VM-exit, and therefore each
> one of them induces a considerable overhead.
>
> When using MMIO (but not PIO), it is possible to map the PCI BARs of the
> virtual machine to some memory area that holds the values that the “emulated
> hardware” is supposed to return. The memory region is mapped as "read-only”
> in the NPT/EPT, so reads from these BAR regions would be treated as regular
> memory reads. Writes would still be trapped and emulated by the hypervisor.

I guess some typo mistake in above paragraph, it's per-device PCI config space
i.e. 4KB ECAM not PCI BARs. Please read above paragraph as:

When using MMIO (but not PIO), it is possible to map the PCI config space of the
virtual machine to some memory area that holds the values that the “emulated
hardware” is supposed to return. The memory region is mapped as "read-only”
in the NPT/EPT, so reads from these PCI config space would be treated as regular
memory reads. Writes would still be trapped and emulated by the hypervisor.

We will send v2 or new patch which will be VMware specific.

> I have a vague recollection from some similar project that I had 10 years
> ago that this might not work for certain emulated device registers. For
> instance some hardware registers, specifically those the report hardware
> events, are “clear-on-read”. Apparently, Ajay took that into consideration.
>
> That is the reason for this quite amazing difference - several orders of
> magnitude - between the overhead that is caused by raw_pci_read(): 120us for
> PIO and 100ns for MMIO. Admittedly, I do not understand why PIO access would
> take 120us (I would have expected it to be 10 times faster, at least), but
> the benefit is quite clear.


\
 
 \ /
  Last update: 2022-07-11 19:54    [W:0.051 / U:1.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site