lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] crypto: qat - fix indentation in ABI documentation
On Mon, Jul 11, 2022 at 02:35:07PM +0200, Vlad Dronov wrote:
> Hi,
>
> On Mon, Jul 11, 2022 at 11:32 AM Giovanni Cabiddu
> <giovanni.cabiddu@intel.com> wrote:
> >
> > On Sat, Jul 09, 2022 at 08:23:35AM +0800, kernel test robot wrote:
> ...skip...
> > > >> Documentation/ABI/testing/sysfs-driver-qat:24: WARNING: Unexpected indentation.
> > >
> > > vim +24 Documentation/ABI/testing/sysfs-driver-qat
> > >
> > > > 24 Date: June 2022
> > I'm not able to spot what the issue is. Any suggestions?
>
> Same here. I do not see what issue the test robot is reporting.
I found what the issue is. It seems Sphinx doesn't like the extra
indentation in the sections.

----8<----

From: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Date: Mon, 11 Jul 2022 16:18:43 +0100
Subject: [PATCH] crypto: qat - fix indentation in ABI documentation
Organization: Intel Research and Development Ireland Ltd - Co. Reg. #308263 - Collinstown Industrial Park, Leixlip, County Kildare - Ireland

Change the indentation in the file sysfs-driver-qat to resolve the
following warning when generating documentation with `make htmldocs`:

Documentation/ABI/testing/sysfs-driver-qat:24: WARNING: Unexpected indentation.

Fixes: d4cfb144f605 ("crypto: qat - expose device config through sysfs for 4xxx")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
---
Documentation/ABI/testing/sysfs-driver-qat | 38 ++++++++++------------
1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
index a600531e9562..741d97fa5ae1 100644
--- a/Documentation/ABI/testing/sysfs-driver-qat
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -8,12 +8,12 @@ Description: Reports the current state of the QAT device and allows to
This attribute is RW.

Returned values:
- up: the device is up and running
- down: the device is down
+ up: the device is up and running
+ down: the device is down

Allowed values:
- up: initialize and start the device
- down: stop the device and bring it down
+ up: initialize and start the device
+ down: stop the device and bring it down

It is possible to transition the device from up to down only
if the device is up and vice versa.
@@ -30,16 +30,12 @@ Description: Reports the current configuration of the QAT device and allows
This attribute is RW.

Returned values:
- sym;asym: the device is configured for running
- crypto services
- dc: the device is configured for running
- compression services
+ sym;asym: the device is configured for running crypto services
+ dc: the device is configured for running compression services

Allowed values:
- sym;asym: configure the device for running
- crypto services
- dc: configure the device for running
- compression services
+ sym;asym: configure the device for running crypto services
+ dc: configure the device for running compression services

It is possible to set the configuration only if the device
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
@@ -47,14 +43,14 @@ Description: Reports the current configuration of the QAT device and allows
The following example shows how to change the configuration of
a device configured for running crypto services in order to
run data compression:
- # cat /sys/bus/pci/devices/<BDF>/qat/state
- up
- # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
- sym;asym
- # echo down > /sys/bus/pci/devices/<BDF>/qat/state
- # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
- # echo up > /sys/bus/pci/devices/<BDF>/qat/state
- # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
- dc
+ # cat /sys/bus/pci/devices/<BDF>/qat/state
+ up
+ # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ sym;asym
+ # echo down > /sys/bus/pci/devices/<BDF>/qat/state
+ # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ # echo up > /sys/bus/pci/devices/<BDF>/qat/state
+ # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+ dc

This attribute is only available for qat_4xxx devices.
--
2.36.1
\
 
 \ /
  Last update: 2022-07-11 18:07    [W:0.065 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site