lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/6] clk: qcom: apss-ipq-pll: add support for IPQ8074
On Mon, 11 Jul 2022 at 15:55, Robert Marko <robimarko@gmail.com> wrote:
>
> On Mon, 11 Jul 2022 at 14:51, Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
> >
> > On Mon, 11 Jul 2022 at 14:22, Robert Marko <robimarko@gmail.com> wrote:
> > >
> > > Add support for IPQ8074 since it uses the same PLL setup, however it does
> > > not require the Alpha PLL to be reconfigured.
> > >
> > > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > > ---
> > > drivers/clk/qcom/apss-ipq-pll.c | 5 ++++-
> > > 1 file changed, 4 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > > index bef7899ad0d6..acfb3ec4f142 100644
> > > --- a/drivers/clk/qcom/apss-ipq-pll.c
> > > +++ b/drivers/clk/qcom/apss-ipq-pll.c
> > > @@ -55,6 +55,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
> > > static int apss_ipq_pll_probe(struct platform_device *pdev)
> > > {
> > > struct device *dev = &pdev->dev;
> > > + struct device_node *node = dev->of_node;
> > > struct regmap *regmap;
> > > void __iomem *base;
> > > int ret;
> > > @@ -67,7 +68,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > > if (IS_ERR(regmap))
> > > return PTR_ERR(regmap);
> > >
> > > - clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
> > > + if (of_device_is_compatible(node, "qcom,ipq6018-a53pll"))
> > > + clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
> >
> > I'd suggest having the 8074 config here too. It seems logical to me to
> > make sure that the pll is configured correctly.
>
> Hi,
>
> I have reworked the driver to use match data so it can be easily provided,
> However, I dont have it as the downstream QCA kernel does not
> reconfigure the PLL, unlike IPQ6018.
> I can probably read the registers from a running board and provide that?

Yes, please try that.

>
> Regards,
> Robert
> >
> > >
> > > ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
> > > if (ret)
> > > @@ -79,6 +81,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > >
> > > static const struct of_device_id apss_ipq_pll_match_table[] = {
> > > { .compatible = "qcom,ipq6018-a53pll" },
> > > + { .compatible = "qcom,ipq8074-a53pll" },
> > > { }
> > > };
> > > MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> > > --
> > > 2.36.1
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry



--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-07-11 14:57    [W:0.062 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site