lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/6] media: dt-bindings: ov5693: document YAML binding
Hi Tommaso

On Mon, Jul 11, 2022 at 01:11:08PM +0200, Tommaso Merciai wrote:
> Hi Jacopo,
> Thanks for your review.
>
> On Mon, Jul 11, 2022 at 11:36:59AM +0200, Jacopo Mondi wrote:
> > Hi Tommaso, Krzysztof,
> >
> > This has been reviewed by Krzysztof already, so I guess it's fine,
> > but let me ask anyway
> >
> > On Thu, Jun 30, 2022 at 03:48:34PM +0200, Tommaso Merciai wrote:
> > > Add documentation of device tree in YAML schema for the OV5693
> > > CMOS image sensor from Omnivision
> > >
> > > Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > > ---
> > > Changes since v1:
> > > - Fix allOf position as suggested by Krzysztof
> > > - Remove port description as suggested by Krzysztof
> > > - Fix EOF as suggested by Krzysztof
> > >
> > > Changes since v2:
> > > - Fix commit body as suggested by Krzysztof
> > >
> > > Changes since v3:
> > > - Add reviewed-by tags, suggested by Jacopo, Krzysztof
> > >
> > > Changes since v4:
> > > - Remove wrong Sakari reviewed-by tag, suggested by Krzysztof, Sakari
> > >
> > > .../bindings/media/i2c/ovti,ov5693.yaml | 106 ++++++++++++++++++
> > > MAINTAINERS | 1 +
> > > 2 files changed, 107 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > > new file mode 100644
> > > index 000000000000..b83c9fc04023
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > > @@ -0,0 +1,106 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +# Copyright (c) 2022 Amarulasolutions
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Omnivision OV5693 CMOS Sensor
> > > +
> > > +maintainers:
> > > + - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> > > +
> > > +description: |
> > > + The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
> > > + image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
> > > + sub-sampled, and windowed 10-bit MIPI images in various formats via the
> > > + Serial Camera Control Bus (SCCB) interface.
> > > +
> > > + OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
> > > + The sensor output is available via CSI-2 serial data output (up to 2-lane).
> > > +
> > > +allOf:
> > > + - $ref: /schemas/media/video-interface-devices.yaml#
> > > +
> > > +properties:
> > > + compatible:
> > > + const: ovti,ov5693
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + description:
> > > + System input clock (aka XVCLK). From 6 to 27 MHz.
> > > + maxItems: 1
> > > +
> > > + dovdd-supply:
> > > + description:
> > > + Digital I/O voltage supply, 1.8V.
> > > +
> > > + avdd-supply:
> > > + description:
> > > + Analog voltage supply, 2.8V.
> > > +
> > > + dvdd-supply:
> > > + description:
> > > + Digital core voltage supply, 1.2V.
> > > +
> > > + reset-gpios:
> > > + description:
> > > + The phandle and specifier for the GPIO that controls sensor reset.
> > > + This corresponds to the hardware pin XSHUTDN which is physically
> > > + active low.
> > > + maxItems: 1
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - clocks
> > > + - dovdd-supply
> > > + - avdd-supply
> > > + - dvdd-supply
> >
> > Should supplies be made mandatory ? Sensors are often powered by fixed
> > rails. Do we want DTS writers to create "fixed-regulators" for all of
> > them ? The fact the regulator framework creates dummies if there's no
> > entry in .dts for a regulator makes me think it's fine to have them
> > optional, but I understand how Linux works should not be an indication
> > of how a bindings should look like.
>
> You are right, this depends on hw design and yes in many cases sensors are
> powered by fixed rails.
> But let me say, I see some design in wich I have to handle these signals and
> in fact are mandatory.

It's fine if you have to handle them, my question is it if it should
be -mandatory- to specify them

>
> I check also in others binding's doc like:
>
> - Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
> - Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
> - Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> ...
>
> These keep this information.
>
> Anyway, You suggest to drop off:
>
> - dovdd-supply
> - avdd-supply
> - dvdd-supply
>
> From required properties, right?

Yes, I wonder if they should be required. As usual there's a
bunch of different styles in media/i2c/ and it's not always easy to
distinguish which ones are actually intended from the ones which are
instead the result of copying the existing.


>
> Tommmaso
>
> >
> > > + - port
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/clock/px30-cru.h>
> > > + #include <dt-bindings/gpio/gpio.h>
> > > + #include <dt-bindings/pinctrl/rockchip.h>
> > > +
> > > + i2c {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + ov5693: camera@36 {
> > > + compatible = "ovti,ov5693";
> > > + reg = <0x36>;
> > > +
> > > + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&cif_clkout_m0>;
> > > +
> > > + clocks = <&cru SCLK_CIF_OUT>;
> > > + assigned-clocks = <&cru SCLK_CIF_OUT>;
> > > + assigned-clock-rates = <19200000>;
> > > +
> > > + avdd-supply = <&vcc_1v8>;
> > > + dvdd-supply = <&vcc_1v2>;
> > > + dovdd-supply = <&vcc_2v8>;
> > > +
> > > + rotation = <90>;
> > > + orientation = <0>;
> > > +
> > > + port {
> > > + ucam_out: endpoint {
> > > + remote-endpoint = <&mipi_in_ucam>;
> > > + data-lanes = <1 2>;
> > > + link-frequencies = /bits/ 64 <450000000>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > +
> > > +...
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 1fc9ead83d2a..844307cb20c4 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -14719,6 +14719,7 @@ M: Daniel Scally <djrscally@gmail.com>
> > > L: linux-media@vger.kernel.org
> > > S: Maintained
> > > T: git git://linuxtv.org/media_tree.git
> > > +F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
> > > F: drivers/media/i2c/ov5693.c
> > >
> > > OMNIVISION OV5695 SENSOR DRIVER
> > > --
> > > 2.25.1
> > >
>
> --
> Tommaso Merciai
> Embedded Linux Engineer
> tommaso.merciai@amarulasolutions.com
> __________________________________
>
> Amarula Solutions SRL
> Via Le Canevare 30, 31100 Treviso, Veneto, IT
> T. +39 042 243 5310
> info@amarulasolutions.com
> www.amarulasolutions.com

\
 
 \ /
  Last update: 2022-07-11 14:39    [W:0.088 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site