lkml.org 
[lkml]   [2022]   [Jul]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl
Hi Martin,

On Mon, Jul 11, 2022 at 6:53 AM Martin Kepplinger
<martin.kepplinger@puri.sm> wrote:
>
> Am Dienstag, dem 26.04.2022 um 12:43 +0200 schrieb Lucas Stach:
> > Am Dienstag, dem 26.04.2022 um 09:38 +0200 schrieb Martin Kepplinger:
> > > Am Montag, dem 25.04.2022 um 17:34 +0200 schrieb Lucas Stach:
> > > > Hi Martin,
> > > >
> > > > Am Montag, dem 25.04.2022 um 17:22 +0200 schrieb Martin
> > > > Kepplinger:
> > > > > Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> > > > > > With the Hantro G1 and G2 now setup to run independently,
> > > > > > update
> > > > > > the device tree to allow both to operate. This requires the
> > > > > > vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
> > > > > > certain clock enabled to handle the gating of the G1 and G2
> > > > > > fuses, the clock-parents and clock-rates for the various
> > > > > > VPU's
> > > > > > to be moved into the pgc_vpu because they cannot get re-
> > > > > > parented
> > > > > > once enabled, and the pgc_vpu is the highest in the chain.
> > > > > >
> > > > > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > > > > Reported-by: kernel test robot <lkp@intel.com>
> > > > > > Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
> > > > > >
> > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > > index 2df2510d0118..549b2440f55d 100644
> > > > > > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > > @@ -737,7 +737,21 @@ pgc_gpu: power-domain@5 {
> > > > > > pgc_vpu: power-
> > > > > > domain@6 {
> > > > > > #power-
> > > > > > domain-
> > > > > > cells =
> > > > > > <0>;
> > > > > > reg =
> > > > > > <IMX8M_POWER_DOMAIN_VPU>;
> > > > > > - clocks =
> > > > > > <&clk
> > > > > > IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > > > + clocks =
> > > > > > <&clk
> > > > > > IMX8MQ_CLK_VPU_DEC_ROOT>,
> > > > > > +
> > > > > > <&clk
> > > > > > IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > > > +
> > > > > > <&clk
> > > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > > + assigned-
> > > > > > clocks =
> > > > > > <&clk IMX8MQ_CLK_VPU_G1>,
> > > > > > +
> > > > > >
> > > > > > <&clk IMX8MQ_CLK_VPU_G2>,
> > > > > > +
> > > > > >
> > > > > > <&clk IMX8MQ_CLK_VPU_BUS>,
> > > > > > +
> > > > > >
> > > > > > <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > > > > > + assigned-
> > > > > > clock-
> > > > > > parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <&clk IMX8MQ_SYS1_PLL_800M>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <&clk IMX8MQ_VPU_PLL>;
> > > > > > + assigned-
> > > > > > clock-
> > > > > > rates
> > > > > > = <600000000>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <600000000>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <800000000>,
> > > > > > +
> > > > > >
> > > > > >
> > > > > > <0>;
> > > > > > };
> > > > > >
> > > > > > pgc_disp:
> > > > > > power-domain@7
> > > > > > {
> > > > > > @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy@382f0040 {
> > > > > > status = "disabled";
> > > > > > };
> > > > > >
> > > > > > - vpu: video-codec@38300000 {
> > > > > > - compatible = "nxp,imx8mq-vpu";
> > > > > > - reg = <0x38300000 0x10000>,
> > > > > > - <0x38310000 0x10000>,
> > > > > > - <0x38320000 0x10000>;
> > > > > > - reg-names = "g1", "g2", "ctrl";
> > > > > > - interrupts = <GIC_SPI 7
> > > > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > > > - <GIC_SPI 8
> > > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > > - interrupt-names = "g1", "g2";
> > > > > > + vpu_g1: video-codec@38300000 {
> > > > > > + compatible = "nxp,imx8mq-vpu-g1";
> > > > > > + reg = <0x38300000 0x10000>;
> > > > > > + interrupts = <GIC_SPI 7
> > > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > > + clocks = <&clk
> > > > > > IMX8MQ_CLK_VPU_G1_ROOT>;
> > > > > > + power-domains = <&vpu_blk_ctrl
> > > > > > IMX8MQ_VPUBLK_PD_G1>;
> > > > > > + };
> > > > > > +
> > > > > > + vpu_g2: video-codec@38310000 {
> > > > > > + compatible = "nxp,imx8mq-vpu-g2";
> > > > > > + reg = <0x38310000 0x10000>;
> > > > > > + interrupts = <GIC_SPI 8
> > > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > > + clocks = <&clk
> > > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > > + power-domains = <&vpu_blk_ctrl
> > > > > > IMX8MQ_VPUBLK_PD_G2>;
> > > > > > + };
> > > > > > +
> > > > > > + vpu_blk_ctrl: blk-ctrl@38320000 {
> > > > > > + compatible = "fsl,imx8mq-vpu-blk-
> > > > > > ctrl";
> > > > > > + reg = <0x38320000 0x100>;
> > > > > > + power-domains = <&pgc_vpu>,
> > > > > > <&pgc_vpu>,
> > > > > > <&pgc_vpu>;
> > > > > > + power-domain-names = "bus", "g1",
> > > > > > "g2";
> > > > > > clocks = <&clk
> > > > > > IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > > > - <&clk
> > > > > > IMX8MQ_CLK_VPU_G2_ROOT>,
> > > > > > - <&clk
> > > > > > IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > > > - clock-names = "g1", "g2", "bus";
> > > > > > - assigned-clocks = <&clk
> > > > > > IMX8MQ_CLK_VPU_G1>,
> > > > > > - <&clk
> > > > > > IMX8MQ_CLK_VPU_G2>,
> > > > > > - <&clk
> > > > > > IMX8MQ_CLK_VPU_BUS>,
> > > > > > - <&clk
> > > > > > IMX8MQ_VPU_PLL_BYPASS>;
> > > > > > - assigned-clock-parents = <&clk
> > > > > > IMX8MQ_VPU_PLL_OUT>,
> > > > > > - <&clk
> > > > > > IMX8MQ_VPU_PLL_OUT>,
> > > > > > - <&clk
> > > > > > IMX8MQ_SYS1_PLL_800M>,
> > > > > > - <&clk
> > > > > > IMX8MQ_VPU_PLL>;
> > > > > > - assigned-clock-rates = <600000000>,
> > > > > > <600000000>,
> > > > > > - <800000000>,
> > > > > > <0>;
> > > > > > - power-domains = <&pgc_vpu>;
> > > > > > + <&clk
> > > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > > + clock-names = "g1", "g2";
> > > > > > + #power-domain-cells = <1>;
> > > > > > };
> > > > > >
> > > > > > pcie0: pcie@33800000 {
> > > > >
> > > > > With this update, when testing suspend to ram on imx8mq, I get:
> > > > >
> > > > > buck4: failed to disable: -ETIMEDOUT
> > > > >
> > > > > where buck4 is power-supply of pgc_vpu. And thus the transition
> > > > > to
> > > > > suspend (and resuming) fails.
> > > > >
> > > > > Have you tested system suspend after the imx8m-blk-ctrl update
> > > > > on
> > > > > imx8mq?
> > > >
> > > > I haven't tested system suspend, don't know if anyone else did.
> > > > However
> > > > I guess that this is just uncovering a preexisting issue in the
> > > > system
> > > > suspend sequencing, which you would also hit if the video
> > > > decoders
> > > > were
> > > > active at system suspend time.
> > > >
> > > > My guess is that the regulator disable fails, due to the power
> > > > domains
> > > > being disabled quite late in the suspend sequence, where i2c
> > > > communication with the PMIC is no longer possible due to i2c
> > > > being
> > > > suspended already or something like that. Maybe you can dig in a
> > > > bit
> > > > on
> > > > the actual sequence on your system and we can see how we can
> > > > rework
> > > > things to suspend the power domains at a time where communication
> > > > with
> > > > the PMIC is still possible?
> > >
> > > What exactly would you like to see? Here's all gpcv2 regulators
> > > disabling on suspend. (gpu (domain 5) is disabled by runtime pm
> > > often):
> > >
> > > [ 47.138700] imx-pgc imx-pgc-domain.5: disabling regulator
> > > [ 47.298071] Freezing user space processes ... (elapsed 0.008
> > > seconds) done.
> > > [ 47.313432] OOM killer disabled.
> > > [ 47.316670] Freezing remaining freezable tasks ... (elapsed
> > > 2.221
> > > seconds) done.
> > > [ 49.672052] imx8m-blk-ctrl 38320000.blk-ctrl:
> > > imx8m_blk_ctrl_suspend
> > > start
> > > [ 49.704417] imx-pgc imx-pgc-domain.0: disabling regulator
> > > [ 49.711114] imx-pgc imx-pgc-domain.6: disabling regulator
> > > [ 49.819064] buck4: failed to disable: -ETIMEDOUT
> > >
> > > The stack looks pretty much the same for all of them, from
> > > pm_suspend()
> > > over genpd_suspend_noiry().
> >
> > So the GPU domain is already suspended before the system suspend,
> > probably due to short runtime PM timeouts.
> >
> > Can you please check at which point the i2c subsystem is suspended? I
> > think we are already past that point when running the PM domain
> > suspend
> > from a _noirq callback. I'll take a look on how we can properly
> > change
> > this ordering.
> >
> > Regards,
> > Lucas
> >
>
> hi Lucas, sorry for not following up on this for so long. This fixes
> suspend/resume for me:
>
> https://lore.kernel.org/linux-arm-kernel/20220711094549.3445566-1-martin.kepplinger@puri.sm/T/#t
>
> thank you for you help so far,
>

Thanks a lot for keeping us posted. The fix for suspend/resume
looks great!

Ezequiel

\
 
 \ /
  Last update: 2022-07-11 14:33    [W:0.313 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site