lkml.org 
[lkml]   [2022]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] Bluetooth: Fix CVSD SCO setup failure
From
On 6/24/2022 11:12 PM, quic_zijuhu wrote:
> On 6/9/2022 7:09 PM, Zijun Hu wrote:
>> It will set up SCO after all CVSD eSCO attempts failure, but
>> still fails to set up SCO finally due to wrong D1/D0 @retrans_effort
>> within @esco_param_cvsd, so change it from 0x1 to 0xff to avoid
>> Invalid HCI Command Parameters error.
>>
>> < HCI Command: Setup Synchrono.. (0x01|0x0028) plen 17 #3427
>> Handle: 3
>> Transmit bandwidth: 8000
>> Receive bandwidth: 8000
>> Max latency: 65535
>> Setting: 0x0060
>> Input Coding: Linear
>> Input Data Format: 2's complement
>> Input Sample Size: 16-bit
>> # of bits padding at MSB: 0
>> Air Coding Format: CVSD
>> Retransmission effort: Optimize for power consumption (0x01)
>> Packet type: 0x03c4
>> HV3 may be used
>> 2-EV3 may not be used
>> 3-EV3 may not be used
>> 2-EV5 may not be used
>> 3-EV5 may not be used
>>> HCI Event: Command Status (0x0f) plen 4 #3428
>> Setup Synchronous Connection (0x01|0x0028) ncmd 1
>> Status: Success (0x00)
>>> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #3429
>> Status: Invalid HCI Command Parameters (0x12)
>> Handle: 0
>> Address: 14:3F:A6:47:56:15 (OUI 14-3F-A6)
>> Link type: SCO (0x00)
>> Transmission interval: 0x00
>> Retransmission window: 0x00
>> RX packet length: 0
>> TX packet length: 0
>> Air mode: u-law log (0x00)
>>
>> Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
>> ---
>> net/bluetooth/hci_conn.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
>> index 7829433d54c1..2627d5ac15d6 100644
>> --- a/net/bluetooth/hci_conn.c
>> +++ b/net/bluetooth/hci_conn.c
>> @@ -45,8 +45,8 @@ static const struct sco_param esco_param_cvsd[] = {
>> { EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a, 0x01 }, /* S3 */
>> { EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007, 0x01 }, /* S2 */
>> { EDR_ESCO_MASK | ESCO_EV3, 0x0007, 0x01 }, /* S1 */
>> - { EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0x01 }, /* D1 */
>> - { EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0x01 }, /* D0 */
>> + { EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0xff }, /* D1 */
>> + { EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0xff }, /* D0 */
>> };
>>
>> static const struct sco_param sco_param_cvsd[] = {
> could you code review for this change?
i have tested this change and it can fix this issue.

\
 
 \ /
  Last update: 2022-07-11 04:04    [W:0.089 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site