lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 12/17] dt-bindings: PCI: dwc: Add Baikal-T1 PCIe Root Port bindings
On Sun, Jun 19, 2022 at 11:03:55PM +0300, Serge Semin wrote:
> On Wed, Jun 15, 2022 at 10:37:12AM -0600, Rob Herring wrote:
> > On Fri, Jun 10, 2022 at 11:57:00AM +0300, Serge Semin wrote:
> > > Baikal-T1 SoC is equipped with DWC PCIe v4.60a Root Port controller, which
> > > link can be trained to work on up to Gen.3 speed over up to x4 lanes. The
> > > controller is supposed to be fed up with four clock sources: DBI
> > > peripheral clock, AXI application Tx/Rx clocks and external PHY/core
> > > reference clock generating the 100MHz signal. In addition to that the
> > > platform provide a way to reset each part of the controller:
> > > sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and
> > > Hot/Power reset signal. The Root Port controller is equipped with multiple
> > > IRQ lines like MSI, system AER, PME, HP, Bandwidth change, Link
> > > equalization request and eDMA ones. The registers space is accessed over
> > > the DBI interface. There can be no more than four inbound or outbound iATU
> > > windows configured.
> > >
> > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > >
> > > ---
> > >
> > > Changelog v2:
> > > - Rename 'syscon' property to 'baikal,bt1-syscon'.
> > > - Fix the 'compatible' property definition to being more specific about
> > > what strings are supposed to be used. Due to that we had to add the
> > > select property to evaluate the schema against the Baikal-T1 PCIe DT
> > > nodes only.
> > > ---
> > > .../bindings/pci/baikal,bt1-pcie.yaml | 154 ++++++++++++++++++
> > > 1 file changed, 154 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> > > new file mode 100644
> > > index 000000000000..23bd1d0aa5c5
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
> > > @@ -0,0 +1,154 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Baikal-T1 PCIe Root Port Controller
> > > +
> > > +maintainers:
> > > + - Serge Semin <fancer.lancer@gmail.com>
> > > +
> > > +description:
> > > + Embedded into Baikal-T1 SoC Root Complex controller. It's based on the
> > > + DWC RC PCIe v4.60a IP-core, which is configured to have just a single Root
> > > + Port function and is capable of establishing the link up to Gen.3 speed
> > > + on x4 lanes. It doesn't have embedded clock and reset control module, so
> > > + the proper interface initialization is supposed to be performed by software.
> > > +
> > > +select:
> > > + properties:
> > > + compatible:
> > > + contains:
> > > + const: baikal,bt1-pcie
> > > +
> > > + required:
> > > + - compatible
> > > +
> > > +allOf:
> > > + - $ref: /schemas/pci/snps,dw-pcie.yaml#
> > > +
> > > +properties:
> > > + compatible:
> > > + items:
> > > + - const: baikal,bt1-pcie
> > > + - const: snps,dw-pcie-4.60a
> >
>
> > Pointless, you can read the version.
>
> The IP-core version CSR was first introduced in v4.70a. So by using
> the version-based compatible string I advertise the actual IP-core
> version.

Ah, right. However, we generally haven't done this elsewhere and you
aren't special.

>
> >
> > > + - const: snps,dw-pcie
> >
>
> > Pointless, because what can you do with this by itself?
>
> In general many things. For instance implement some IP-core specific
> quirks in the generic part of the PCIe subsystem, visually identify
> the device origin, etc.

Experience has shown these are not useful. Drop it. Anything in the PCI
core would probably use the RP VID/PID.

Furthermore, there is no guarantee that you won't match and bind to the
dw_plat_pcie_driver instead. The kernel has no mechanism to bind to the
best match (which is further complicated with modules).


> > > + reg:
> > > + description:
> > > + DBI, DBI2 and at least 4KB outbound iATU-capable region.
> > > + maxItems: 3
> > > +
> > > + reg-names:
> > > + minItems: 3
> > > + maxItems: 3
> > > + items:
> > > + enum: [ dbi, dbi2, config ]
> >
>
> > This should define the order.
>
> Please, tell me why do you persist in the items being ordered? The
> driver permits the relaxed order of the resources. Thus there is no
> much need in such constraint. At least I can't find any.

Tell me why you need random order.


> > > + interrupts:
> > > + description:
> > > + MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
> > > + request and eight Read/Write eDMA IRQ lines are available.
> > > + maxItems: 14
> > > +
> > > + interrupt-names:
> > > + minItems: 14
> > > + maxItems: 14
> > > + items:
> > > + oneOf:
> > > + - pattern: '^dma[0-7]$'
> > > + - enum: [ msi, aer, pme, hp, bw_mg, l_eq ]
> >
>
> > Define the order.
>
> Fourteen IRQs? dma0, dma1, dma2, ..., msi, aer, ..., l_eq?

If that's what the h/w has...

>
> >
> > > +
> > > + clocks:
> > > + description:
> > > + DBI (attached to the APB bus), AXI-bus master and slave interfaces
> > > + are fed up by the dedicated application clocks. A common reference
> > > + clock signal is supposed to be attached to the corresponding Ref-pad
> > > + of the SoC. It will be redistributed amongst the controller core
> > > + sub-modules (pipe, core, aux, etc).
> > > + minItems: 4
> > > + maxItems: 4
> > > +
> > > + clock-names:
> > > + minItems: 4
> > > + maxItems: 4
> > > + items:
> > > + enum: [ dbi, mstr, slv, ref ]
> > > +
> > > + resets:
> > > + description:
> > > + A comprehensive controller reset logic is supposed to be implemented
> > > + by software, so almost all the possible application and core reset
> > > + signals are exposed via the system CCU module.
> > > + minItems: 9
> > > + maxItems: 9
> > > +
> > > + reset-names:
> > > + minItems: 9
> > > + maxItems: 9
> > > + items:
> > > + enum: [ mstr, slv, pwr, hot, phy, core, pipe, sticky, non-sticky ]
> > > +
> > > + baikal,bt1-syscon:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description:
> > > + Phandle to the Baikal-T1 System Controller DT node. It's required to
> > > + access some additional PM, Reset-related and LTSSM signals.
> > > +
> > > + num-lanes:
> > > + maximum: 4
> > > +
> > > + max-link-speed:
> > > + maximum: 3
> > > +
> >
>
> > > + num-ob-windows:
> > > + const: 4
> > > +
> > > + num-ib-windows:
> > > + const: 4
> >
> > Remove these. They are deprecated and shouldn't be in new bindings.
>
> Aren't they deprecated in the framework of the DT nodes only?

Yes, and that means don't use in new users.

> Can't I still use them here to signify the number of iATU windows?

No.

Rob

\
 
 \ /
  Last update: 2022-07-01 17:01    [W:0.208 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site