lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/1] remoteproc: mediatek: enable cache for mt8186 SCP
Date
This patch is for enableing cache in SCP. There is not enough space
on the SRAM of SCP. We need to run programs in DRAM. The DRAM power
and latency is much larger than SRAM, so cache is used to mitigate
the negative effects for performance. we set SCP registers for cache
size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset
in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache.

This patch was tested on MediaTek mt8186.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
---
drivers/remoteproc/mtk_scp.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 47b2a40e1b4a..5b2ad789e720 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1);
writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2);

+ /*
+ * Set I-cache and D-cache size before loading SCP FW.
+ * SCP SRAM logical address may change when cache size setting differs.
+ */
+ writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB,
+ scp->reg_base + MT8183_SCP_CACHE_CON);
+ writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON);
+
return 0;
}

@@ -943,7 +951,7 @@ static const struct mtk_scp_of_data mt8186_of_data = {
.scp_da_to_va = mt8183_scp_da_to_va,
.host_to_scp_reg = MT8183_HOST_TO_SCP,
.host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT,
- .ipi_buf_offset = 0x7bdb0,
+ .ipi_buf_offset = 0x3bdb0,
};

static const struct mtk_scp_of_data mt8192_of_data = {
--
2.18.0
\
 
 \ /
  Last update: 2022-07-01 14:15    [W:0.144 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site