lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/2] UML: add support for KASAN under x86_64
On Fri, 1 Jul 2022 at 11:16, David Gow <davidgow@google.com> wrote:
>
> From: Patricia Alfonso <trishalfonso@google.com>
>
> Make KASAN run on User Mode Linux on x86_64.
>
> The UML-specific KASAN initializer uses mmap to map the ~16TB of shadow
> memory to the location defined by KASAN_SHADOW_OFFSET. kasan_init()
> utilizes constructors to initialize KASAN before main().
>
> The location of the KASAN shadow memory, starting at
> KASAN_SHADOW_OFFSET, can be configured using the KASAN_SHADOW_OFFSET
> option. The default location of this offset is 0x100000000000, which
> keeps it out-of-the-way even on UML setups with more "physical" memory.
>
> For low-memory setups, 0x7fff8000 can be used instead, which fits in an
> immediate and is therefore faster, as suggested by Dmitry Vyukov. There
> is usually enough free space at this location; however, it is a config
> option so that it can be easily changed if needed.
>
> Note that, unlike KASAN on other architectures, vmalloc allocations
> still use the shadow memory allocated upfront, rather than allocating
> and free-ing it per-vmalloc allocation.
>
> If another architecture chooses to go down the same path, we should
> replace the checks for CONFIG_UML with something more generic, such
> as:
> - A CONFIG_KASAN_NO_SHADOW_ALLOC option, which architectures could set
> - or, a way of having architecture-specific versions of these vmalloc
> and module shadow memory allocation options.
>
> Also note that, while UML supports both KASAN in inline mode
> (CONFIG_KASAN_INLINE) and static linking (CONFIG_STATIC_LINK), it does
> not support both at the same time.
>
> Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
> Co-developed-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
> Signed-off-by: David Gow <davidgow@google.com>
> Reviewed-by: Johannes Berg <johannes@sipsolutions.net>

Reviewed-by: Dmitry Vyukov <dvyukov@google.com>


> ---
> This is v5 of the KASAN/UML port. It should be ready to go (this time,
> for sure! :-))
>
> Note that this will fail to build if UML is linked statically due to:
> https://lore.kernel.org/all/20220526185402.955870-1-davidgow@google.com/
>
> Changes since v4:
> https://lore.kernel.org/lkml/20220630080834.2742777-2-davidgow@google.com/
> - Instrument all of the stacktrace code (except for the actual reading
> of the stack frames).
> - This means that stacktrace.c and sysrq.c are now instrumented.
> - Stack frames are read with READ_ONCE_NOCHECK()
> - Thanks Andrey for pointing this out.
>
> Changes since v3:
> https://lore.kernel.org/lkml/20220630074757.2739000-2-davidgow@google.com/
> - Fix some tabs which got converted to spaces by a rogue vim plugin.
>
> Changes since v2:
> https://lore.kernel.org/lkml/20220527185600.1236769-2-davidgow@google.com/
> - Don't define CONFIG_KASAN in USER_CFLAGS, given we dont' use it.
> (Thanks Johannes)
> - Update patch descriptions and comments given we allocate shadow memory based
> on the size of the virtual address space, not the "physical" memory
> used by UML.
> - This was changed between the original RFC and v1, with
> KASAN_SHADOW_SIZE's definition being updated.
> - References to UML using 18TB of space and the shadow memory taking
> 2.25TB were updated. (Thanks Johannes)
> - A mention of physical memory in a comment was updated. (Thanks
> Andrey)
> - Move some discussion of how the vmalloc() handling could be made more
> generic from a comment to the commit description. (Thanks Andrey)
>
> Changes since RFC v3:
> https://lore.kernel.org/all/20220526010111.755166-1-davidgow@google.com/
> - No longer print "KernelAddressSanitizer initialized" (Johannes)
> - Document the reason for the CONFIG_UML checks in shadow.c (Dmitry)
> - Support static builds via kasan_arch_is_ready() (Dmitry)
> - Get rid of a redundant call to kasam_mem_to_shadow() (Dmitry)
> - Use PAGE_ALIGN and the new PAGE_ALIGN_DOWN macros (Dmitry)
> - Reinstate missing arch/um/include/asm/kasan.h file (Johannes)
>
> Changes since v1:
> https://lore.kernel.org/all/20200226004608.8128-1-trishalfonso@google.com/
> - Include several fixes from Vincent Whitchurch:
> https://lore.kernel.org/all/20220525111756.GA15955@axis.com/
> - Support for KASAN_VMALLOC, by changing the way
> kasan_{populate,release}_vmalloc work to update existing shadow
> memory, rather than allocating anything new.
> - A similar fix for modules' shadow memory.
> - Support for KASAN_STACK
> - This requires the bugfix here:
> https://lore.kernel.org/lkml/20220523140403.2361040-1-vincent.whitchurch@axis.com/
> - Plus a couple of files excluded from KASAN.
> - Revert the default shadow offset to 0x100000000000
> - This was breaking when mem=1G for me, at least.
> - A few minor fixes to linker sections and scripts.
> - I've added one to dyn.lds.S on top of the ones Vincent added.
>
> ---
> arch/um/Kconfig | 15 +++++++++++++
> arch/um/include/asm/common.lds.S | 2 ++
> arch/um/include/asm/kasan.h | 37 ++++++++++++++++++++++++++++++++
> arch/um/kernel/dyn.lds.S | 6 +++++-
> arch/um/kernel/mem.c | 19 ++++++++++++++++
> arch/um/kernel/stacktrace.c | 2 +-
> arch/um/os-Linux/mem.c | 22 +++++++++++++++++++
> arch/um/os-Linux/user_syms.c | 4 ++--
> arch/x86/um/Makefile | 3 ++-
> arch/x86/um/vdso/Makefile | 3 +++
> mm/kasan/shadow.c | 29 +++++++++++++++++++++++--
> 11 files changed, 135 insertions(+), 7 deletions(-)
> create mode 100644 arch/um/include/asm/kasan.h
>
> diff --git a/arch/um/Kconfig b/arch/um/Kconfig
> index 8062a0c08952..289c9dc226d6 100644
> --- a/arch/um/Kconfig
> +++ b/arch/um/Kconfig
> @@ -12,6 +12,8 @@ config UML
> select ARCH_HAS_STRNLEN_USER
> select ARCH_NO_PREEMPT
> select HAVE_ARCH_AUDITSYSCALL
> + select HAVE_ARCH_KASAN if X86_64
> + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
> select HAVE_ARCH_SECCOMP_FILTER
> select HAVE_ASM_MODVERSIONS
> select HAVE_UID16
> @@ -220,6 +222,19 @@ config UML_TIME_TRAVEL_SUPPORT
>
> It is safe to say Y, but you probably don't need this.
>
> +config KASAN_SHADOW_OFFSET
> + hex
> + depends on KASAN
> + default 0x100000000000
> + help
> + This is the offset at which the ~16TB of shadow memory is
> + mapped and used by KASAN for memory debugging. This can be any
> + address that has at least KASAN_SHADOW_SIZE (total address space divided
> + by 8) amount of space so that the KASAN shadow memory does not conflict
> + with anything. The default is 0x100000000000, which works even if mem is
> + set to a large value. On low-memory systems, try 0x7fff8000, as it fits
> + into the immediate of most instructions, improving performance.
> +
> endmenu
>
> source "arch/um/drivers/Kconfig"
> diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
> index eca6c452a41b..fd481ac371de 100644
> --- a/arch/um/include/asm/common.lds.S
> +++ b/arch/um/include/asm/common.lds.S
> @@ -83,6 +83,8 @@
> }
> .init_array : {
> __init_array_start = .;
> + *(.kasan_init)
> + *(.init_array.*)
> *(.init_array)
> __init_array_end = .;
> }
> diff --git a/arch/um/include/asm/kasan.h b/arch/um/include/asm/kasan.h
> new file mode 100644
> index 000000000000..0d6547f4ec85
> --- /dev/null
> +++ b/arch/um/include/asm/kasan.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __ASM_UM_KASAN_H
> +#define __ASM_UM_KASAN_H
> +
> +#include <linux/init.h>
> +#include <linux/const.h>
> +
> +#define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
> +
> +/* used in kasan_mem_to_shadow to divide by 8 */
> +#define KASAN_SHADOW_SCALE_SHIFT 3
> +
> +#ifdef CONFIG_X86_64
> +#define KASAN_HOST_USER_SPACE_END_ADDR 0x00007fffffffffffUL
> +/* KASAN_SHADOW_SIZE is the size of total address space divided by 8 */
> +#define KASAN_SHADOW_SIZE ((KASAN_HOST_USER_SPACE_END_ADDR + 1) >> \
> + KASAN_SHADOW_SCALE_SHIFT)
> +#else
> +#error "KASAN_SHADOW_SIZE is not defined for this sub-architecture"
> +#endif /* CONFIG_X86_64 */
> +
> +#define KASAN_SHADOW_START (KASAN_SHADOW_OFFSET)
> +#define KASAN_SHADOW_END (KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
> +
> +#ifdef CONFIG_KASAN
> +void kasan_init(void);
> +void kasan_map_memory(void *start, unsigned long len);
> +extern int kasan_um_is_ready;
> +
> +#ifdef CONFIG_STATIC_LINK
> +#define kasan_arch_is_ready() (kasan_um_is_ready)
> +#endif
> +#else
> +static inline void kasan_init(void) { }
> +#endif /* CONFIG_KASAN */
> +
> +#endif /* __ASM_UM_KASAN_H */
> diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
> index 2f2a8ce92f1e..2b7fc5b54164 100644
> --- a/arch/um/kernel/dyn.lds.S
> +++ b/arch/um/kernel/dyn.lds.S
> @@ -109,7 +109,11 @@ SECTIONS
> be empty, which isn't pretty. */
> . = ALIGN(32 / 8);
> .preinit_array : { *(.preinit_array) }
> - .init_array : { *(.init_array) }
> + .init_array : {
> + *(.kasan_init)
> + *(.init_array.*)
> + *(.init_array)
> + }
> .fini_array : { *(.fini_array) }
> .data : {
> INIT_TASK_DATA(KERNEL_STACK_SIZE)
> diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
> index 15295c3237a0..276a1f0b91f1 100644
> --- a/arch/um/kernel/mem.c
> +++ b/arch/um/kernel/mem.c
> @@ -18,6 +18,25 @@
> #include <kern_util.h>
> #include <mem_user.h>
> #include <os.h>
> +#include <linux/sched/task.h>
> +
> +#ifdef CONFIG_KASAN
> +int kasan_um_is_ready;
> +void kasan_init(void)
> +{
> + /*
> + * kasan_map_memory will map all of the required address space and
> + * the host machine will allocate physical memory as necessary.
> + */
> + kasan_map_memory((void *)KASAN_SHADOW_START, KASAN_SHADOW_SIZE);
> + init_task.kasan_depth = 0;
> + kasan_um_is_ready = true;
> +}
> +
> +static void (*kasan_init_ptr)(void)
> +__section(".kasan_init") __used
> += kasan_init;
> +#endif
>
> /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
> unsigned long *empty_zero_page = NULL;
> diff --git a/arch/um/kernel/stacktrace.c b/arch/um/kernel/stacktrace.c
> index 86df52168bd9..fd3b61b3d4d2 100644
> --- a/arch/um/kernel/stacktrace.c
> +++ b/arch/um/kernel/stacktrace.c
> @@ -27,7 +27,7 @@ void dump_trace(struct task_struct *tsk,
>
> frame = (struct stack_frame *)bp;
> while (((long) sp & (THREAD_SIZE-1)) != 0) {
> - addr = *sp;
> + addr = READ_ONCE_NOCHECK(*sp);
> if (__kernel_text_address(addr)) {
> reliable = 0;
> if ((unsigned long) sp == bp + sizeof(long)) {
> diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
> index 3c1b77474d2d..8530b2e08604 100644
> --- a/arch/um/os-Linux/mem.c
> +++ b/arch/um/os-Linux/mem.c
> @@ -17,6 +17,28 @@
> #include <init.h>
> #include <os.h>
>
> +/*
> + * kasan_map_memory - maps memory from @start with a size of @len.
> + * The allocated memory is filled with zeroes upon success.
> + * @start: the start address of the memory to be mapped
> + * @len: the length of the memory to be mapped
> + *
> + * This function is used to map shadow memory for KASAN in uml
> + */
> +void kasan_map_memory(void *start, size_t len)
> +{
> + if (mmap(start,
> + len,
> + PROT_READ|PROT_WRITE,
> + MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE|MAP_NORESERVE,
> + -1,
> + 0) == MAP_FAILED) {
> + os_info("Couldn't allocate shadow memory: %s\n.",
> + strerror(errno));
> + exit(1);
> + }
> +}
> +
> /* Set by make_tempfile() during early boot. */
> static char *tempdir = NULL;
>
> diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
> index 715594fe5719..cb667c9225ab 100644
> --- a/arch/um/os-Linux/user_syms.c
> +++ b/arch/um/os-Linux/user_syms.c
> @@ -27,10 +27,10 @@ EXPORT_SYMBOL(strstr);
> #ifndef __x86_64__
> extern void *memcpy(void *, const void *, size_t);
> EXPORT_SYMBOL(memcpy);
> -#endif
> -
> EXPORT_SYMBOL(memmove);
> EXPORT_SYMBOL(memset);
> +#endif
> +
> EXPORT_SYMBOL(printf);
>
> /* Here, instead, I can provide a fake prototype. Yes, someone cares: genksyms.
> diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
> index ba5789c35809..f778e37494ba 100644
> --- a/arch/x86/um/Makefile
> +++ b/arch/x86/um/Makefile
> @@ -28,7 +28,8 @@ else
>
> obj-y += syscalls_64.o vdso/
>
> -subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o
> +subarch-y = ../lib/csum-partial_64.o ../lib/memcpy_64.o ../entry/thunk_64.o \
> + ../lib/memmove_64.o ../lib/memset_64.o
>
> endif
>
> diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
> index 5943387e3f35..8c0396fd0e6f 100644
> --- a/arch/x86/um/vdso/Makefile
> +++ b/arch/x86/um/vdso/Makefile
> @@ -3,6 +3,9 @@
> # Building vDSO images for x86.
> #
>
> +# do not instrument on vdso because KASAN is not compatible with user mode
> +KASAN_SANITIZE := n
> +
> # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
> KCOV_INSTRUMENT := n
>
> diff --git a/mm/kasan/shadow.c b/mm/kasan/shadow.c
> index a4f07de21771..0e3648b603a6 100644
> --- a/mm/kasan/shadow.c
> +++ b/mm/kasan/shadow.c
> @@ -295,9 +295,22 @@ int kasan_populate_vmalloc(unsigned long addr, unsigned long size)
> return 0;
>
> shadow_start = (unsigned long)kasan_mem_to_shadow((void *)addr);
> - shadow_start = ALIGN_DOWN(shadow_start, PAGE_SIZE);
> shadow_end = (unsigned long)kasan_mem_to_shadow((void *)addr + size);
> - shadow_end = ALIGN(shadow_end, PAGE_SIZE);
> +
> + /*
> + * User Mode Linux maps enough shadow memory for all of virtual memory
> + * at boot, so doesn't need to allocate more on vmalloc, just clear it.
> + *
> + * The remaining CONFIG_UML checks in this file exist for the same
> + * reason.
> + */
> + if (IS_ENABLED(CONFIG_UML)) {
> + __memset((void *)shadow_start, KASAN_VMALLOC_INVALID, shadow_end - shadow_start);
> + return 0;
> + }
> +
> + shadow_start = PAGE_ALIGN_DOWN(shadow_start);
> + shadow_end = PAGE_ALIGN(shadow_end);
>
> ret = apply_to_page_range(&init_mm, shadow_start,
> shadow_end - shadow_start,
> @@ -466,6 +479,10 @@ void kasan_release_vmalloc(unsigned long start, unsigned long end,
>
> if (shadow_end > shadow_start) {
> size = shadow_end - shadow_start;
> + if (IS_ENABLED(CONFIG_UML)) {
> + __memset(shadow_start, KASAN_SHADOW_INIT, shadow_end - shadow_start);
> + return;
> + }
> apply_to_existing_page_range(&init_mm,
> (unsigned long)shadow_start,
> size, kasan_depopulate_vmalloc_pte,
> @@ -531,6 +548,11 @@ int kasan_alloc_module_shadow(void *addr, size_t size, gfp_t gfp_mask)
> if (WARN_ON(!PAGE_ALIGNED(shadow_start)))
> return -EINVAL;
>
> + if (IS_ENABLED(CONFIG_UML)) {
> + __memset((void *)shadow_start, KASAN_SHADOW_INIT, shadow_size);
> + return 0;
> + }
> +
> ret = __vmalloc_node_range(shadow_size, 1, shadow_start,
> shadow_start + shadow_size,
> GFP_KERNEL,
> @@ -554,6 +576,9 @@ int kasan_alloc_module_shadow(void *addr, size_t size, gfp_t gfp_mask)
>
> void kasan_free_module_shadow(const struct vm_struct *vm)
> {
> + if (IS_ENABLED(CONFIG_UML))
> + return;
> +
> if (vm->flags & VM_KASAN)
> vfree(kasan_mem_to_shadow(vm->addr));
> }
> --
> 2.37.0.rc0.161.g10f37bed90-goog
>

\
 
 \ /
  Last update: 2022-07-01 12:36    [W:0.054 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site