lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 6/6] arm64: dts: mt8192: Add vcodec lat and core nodes
On Fri, Jul 1, 2022 at 5:06 PM Allen-KH Cheng
<allen-kh.cheng@mediatek.com> wrote:
>
> Add vcodec lat and core nodes for mt8192 SoC.
>
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8192.dtsi | 60 ++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index 6d9164b47bd1..2a1ad3084a01 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -1437,6 +1437,66 @@
> power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
> };
>
> + vcodec_dec: vcodec-dec@16000000 {
> + compatible = "mediatek,mt8192-vcodec-dec";
> + reg = <0 0x16000000 0 0x1000>;
> + mediatek,scp = <&scp>;
> + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
> + dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0 0 0x16000000 0 0x26000>;
> +
> + vcodec_lat: vcodec-lat@10000 {
> + compatible = "mediatek,mtk-vcodec-lat";
> + reg = <0x0 0x10000 0 0x800>;
> + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
> + iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
> + <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
> + clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> + <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
> + <&vdecsys_soc CLK_VDEC_SOC_LAT>,
> + <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
> + <&topckgen CLK_TOP_MAINPLL_D4>;
> + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";

sel and top don't make sense. You should not be referencing upper level
clocks.

CLK_VDEC_SOC_LARB1 doesn't make a lot of sense either, since that should
be referenced in the larb. Unless if the clock doesn't get turned on when
the IOMMU is bypassed.

Last, would it work if lat only referenced CLK_VDEC_SOC_LAT, and core only
referenced CLK_VDEC_SOC_VDEC?


Thanks
ChenYu

> + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
> + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
> + };
> +
> + vcodec_core: vcodec-core@25000 {
> + compatible = "mediatek,mtk-vcodec-core";
> + reg = <0 0x25000 0 0x1000>;
> + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
> + iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
> + <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
> + clocks = <&topckgen CLK_TOP_VDEC_SEL>,
> + <&vdecsys CLK_VDEC_VDEC>,
> + <&vdecsys CLK_VDEC_LAT>,
> + <&vdecsys CLK_VDEC_LARB1>,
> + <&topckgen CLK_TOP_MAINPLL_D4>;
> + clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
> + assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
> + power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
> + };
> + };
> +
> larb5: larb@1600d000 {
> compatible = "mediatek,mt8192-smi-larb";
> reg = <0 0x1600d000 0 0x1000>;
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2022-07-01 12:00    [W:0.213 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site