lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    SubjectRe: [PATCH 1/2] dt-bindings: iio: adc: ti,adc128s052: Add adc08c and adc10c family
    From
    On 01/07/2022 08:38, Krzysztof Kozlowski wrote:
    > On 01/07/2022 06:29, Nishanth Menon wrote:
    >> The adcxx4s communicates with a host processor via an SPI/Microwire Bus
    >> interface. The device family responds with 12bit data, of which the LSB
    >> bits are 0 for the lower resolution devices. I have been able to test
    >> adc102s051, hence adding just the missing ones in that family.
    >>
    >> Lets reuse the binding to support the family of devices with name
    >> ADC<bb><c>S<sss>, where
    >> * bb is the resolution in number of bits (8, 10, 12)
    >> * c is the number of channels (1, 2, 4, 8)
    >> * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
    >> and 101 for 1 MSPS)
    >>
    >> Complete datasheets are available at TI's website here:
    >> https://www.ti.com/lit/gpn/adc<bb><c>s<sss>.pdf
    >>
    >> Handling of 8, 10 and 12 bits converters are the same, the
    >> unavailable bits are 0 in LSB :)
    >>
    >> Inspired-by: drivers/hwmon/adcxx.c
    >>
    >> Signed-off-by: Nishanth Menon <nm@ti.com>
    >> ---
    >>
    >> Checkpatch does complain with Inspired-by: insisting it to be an email
    >> address.. but I was really inspired by the hwmon driver.. Don't know
    >> what else to say here.. we could probably drop it?
    >
    > Drop it or convert to just test.

    This should be:

    Drop it or convert to just text sentence.

    Best regards,
    Krzysztof

    \
     
     \ /
      Last update: 2022-07-01 10:29    [W:3.125 / U:0.636 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site