Messages in this thread | | | Date | Fri, 1 Jul 2022 10:16:07 +0200 | Subject | Re: [PATCH] ARM: dts: lan966x: Add mcan1 node. | From | Nicolas Ferre <> |
| |
On 27/06/2022 at 13:05, Kavyasree Kotagiri wrote: > Add the mcan1 node. By default, keep it disabled. > > Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Looks good to me: Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
We'll queue in the next dt branch soon, for integration through arm-soc tree.
Thanks, regards, Nicolas
> --- > arch/arm/boot/dts/lan966x.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi > index 3cb02fffe716..25cfa89dde7b 100644 > --- a/arch/arm/boot/dts/lan966x.dtsi > +++ b/arch/arm/boot/dts/lan966x.dtsi > @@ -473,6 +473,21 @@ > status = "disabled"; > }; > > + can1: can@e0820000 { > + compatible = "bosch,m_can"; > + reg = <0xe0820000 0xfc>, <0x00100000 0x8000>; > + reg-names = "m_can", "message_ram"; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "int0", "int1"; > + clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>; > + clock-names = "hclk", "cclk"; > + assigned-clocks = <&clks GCK_ID_MCAN1>; > + assigned-clock-rates = <40000000>; > + bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>; > + status = "disabled"; > + }; > + > reset: reset-controller@e200400c { > compatible = "microchip,lan966x-switch-reset"; > reg = <0xe200400c 0x4>;
-- Nicolas Ferre
| |