lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/9] PM: domains: Delete usage of driver_deferred_probe_check_state()
Hi Saravana,

On Fri, Jul 1, 2022 at 1:11 AM Saravana Kannan <saravanak@google.com> wrote:
> On Mon, Jun 27, 2022 at 2:10 AM Tony Lindgren <tony@atomide.com> wrote:
> > * Saravana Kannan <saravanak@google.com> [220623 08:17]:
> > > On Thu, Jun 23, 2022 at 12:01 AM Tony Lindgren <tony@atomide.com> wrote:
> > > > * Saravana Kannan <saravanak@google.com> [220622 19:05]:
> > > > > On Tue, Jun 21, 2022 at 9:59 PM Tony Lindgren <tony@atomide.com> wrote:
> > > > > > This issue is no directly related fw_devlink. It is a side effect of
> > > > > > removing driver_deferred_probe_check_state(). We no longer return
> > > > > > -EPROBE_DEFER at the end of driver_deferred_probe_check_state().
> > > > >
> > > > > Yes, I understand the issue. But driver_deferred_probe_check_state()
> > > > > was deleted because fw_devlink=on should have short circuited the
> > > > > probe attempt with an -EPROBE_DEFER before reaching the bus/driver
> > > > > probe function and hitting this -ENOENT failure. That's why I was
> > > > > asking the other questions.
> > > >
> > > > OK. So where is the -EPROBE_DEFER supposed to happen without
> > > > driver_deferred_probe_check_state() then?
> > >
> > > device_links_check_suppliers() call inside really_probe() would short
> > > circuit and return an -EPROBE_DEFER if the device links are created as
> > > expected.
> >
> > OK
> >
> > > > Hmm so I'm not seeing any supplier for the top level ocp device in
> > > > the booting case without your patches. I see the suppliers for the
> > > > ocp child device instances only.
> > >
> > > Hmmm... this is strange (that the device link isn't there), but this
> > > is what I suspected.
> >
> > Yup, maybe it's because of the supplier being a device in the child
> > interconnect for the ocp.
>
> Ugh... yeah, this is why the normal (not SYNC_STATE_ONLY) device link
> isn't being created.
>
> So the aggregated view is something like (I had to set tabs = 4 space
> to fit it within 80 cols):
>
> ocp: ocp { <========================= Consumer
> compatible = "simple-pm-bus";
> power-domains = <&prm_per>; <=========== Supplier ref
>
> l4_wkup: interconnect@44c00000 {
> compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
>
> segment@200000 { /* 0x44e00000 */
> compatible = "simple-pm-bus";
>
> target-module@0 { /* 0x44e00000, ap 8 58.0 */
> compatible = "ti,sysc-omap4", "ti,sysc";
>
> prcm: prcm@0 {
> compatible = "ti,am3-prcm", "simple-bus";
>
> prm_per: prm@c00 { <========= Actual Supplier
> compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
> };
> };
> };
> };
> };
> };
>
> The power-domain supplier is the great-great-great-grand-child of the
> consumer. It's not clear to me how this is valid. What does it even
> mean?
>
> Rob, is this considered a valid DT?
>
> Geert, thoughts on whether this is a correct use of simple-pm-bus device?

Well, if the hardware is wired that way...

It's not that dissimilar from CPU cores, and interrupt and GPIO
controllers in power domains and clocked by controllable clocks:
you can cut the branch you're sitting on, and you have to be careful
when going to sleep, and make sure your wake-up sources are still
functional.

> Also, how is the power domain attach/get working in this case? As far
> as I can tell, at least for "simple-pm-bus" devices, the pm domain
> attachment is happening under:
> really_probe() -> call_driver_probe -> platform_probe() ->
> dev_pm_domain_attach()
>
> So, how is the pm domain attach succeeding in the first place without
> my changes?

That's a software thing ;-)

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2022-07-01 09:48    [W:0.172 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site