lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 10/10] HID: usbhid: Set USB mice as s2idle wakeup resources
On Thu, Jun 30, 2022 at 09:33:28PM -0500, Mario Limonciello wrote:
> The USB HID transport layer doesn't configure mice for wakeup by default.
> Thus users can not wake system from s2idle via USB mouse. However, users
> can wake the same system from Modern Standby on Windows with the same USB
> mouse.
>
> Microsoft documentation indicates that all USB mice and touchpads should
> be waking the system from Modern Standby.
>
> Many people who have used Windows on a PC that supports Modern Standby
> have an expectation that s2idle wakeup sources should behave the same in
> Linux. For example if your PC is configured "dual-boot" and is used docked
> it's very common to wakeup by using a USB mouse connected to your dock in
> Windows. Switching to Linux this is not enabled by default and you'll
> need to manually turn it on or use a different wakeup source than you did
> for Windows.
>
> Changes for wakeups have been made in other subsystems such as the PS/2
> keyboard driver which align how wakeup sources in Linux and Modern Standby
> in Windows behave. To align expectations from users on USB mice, make this
> behavior the same when the system is configured both by the OEM and the
> user to use s2idle in Linux.
>
> This means that at a minimum supported mice will be able to wakeup by
> clicking a button. If the USB mouse is powered over the s2idle cycle (such
> as a wireless mouse with a battery) it's also possible that moving it
> may wake up the system. This is HW dependent behavior.
>
> If the user sets the system to use S3 instead of s2idle, or the OEM ships
> the system defaulting to S3, this behavior will not be turned on by
> default.
>
> Users who have a modern laptop that supports s2idle and use s2idle but
> prefer the previous Linux kernel behavior can turn this off via a udev
> rule.
>
> Link: https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-wake-sources#input-devices-1
> Link: https://lore.kernel.org/linux-usb/20220404214557.3329796-1-richard.gong@amd.com/
> Suggested-by: Richard Gong <richard.gong@amd.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
> More people keep coming to us confused that they couldn't wake a Linux system
> up from sleep using a mouse, so this patch is being revived.
>
> Microsoft documentation doesn't indicate any allowlist for this behavior, and
> they actually prescribe it for all USB mice and touchpads.

Note, this is very different than older versions of Windows. Any idea
when this behavior and prescription changed?

Also, how are you going to handle the differences between "internal" and
"external" USB mice and touchpads? The microsoft link above only
references external USB and Bluetooth devices, not internal ones.

>
> changes from v2->v3:
> * Use `pm_suspend_preferred_s2idle`
> * Drop now unnecessary acpi.h header inclusion
> * Update commit message
> * Adjust comments from v2 per thread
>
> changes from v1->v2:
> * Resubmit by Mario
> * Update commit message
> * Only activate on systems configured by user and OEM for using s2idle
> ---
> drivers/hid/usbhid/hid-core.c | 37 ++++++++++++++++++++++++-----------
> 1 file changed, 26 insertions(+), 11 deletions(-)

Where are patches 1-9 of this series?

confused,

greg k-h

\
 
 \ /
  Last update: 2022-07-01 09:00    [W:0.440 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site