lkml.org 
[lkml]   [2022]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Multi-page folio issues in 5.19-rc4 (was [PATCH v3 25/25] xfs: Support large folios)
On Fri, Jul 01, 2022 at 12:03:23PM -0400, Brian Foster wrote:
> On Wed, Jun 29, 2022 at 01:22:06PM -0700, Darrick J. Wong wrote:
> > On Wed, Jun 29, 2022 at 08:57:30AM -0400, Brian Foster wrote:
> > > On Tue, Jun 28, 2022 at 04:21:55PM -0700, Darrick J. Wong wrote:
> > > > On Wed, Jun 29, 2022 at 08:17:57AM +1000, Dave Chinner wrote:
> > > > > On Tue, Jun 28, 2022 at 02:18:24PM +0100, Matthew Wilcox wrote:
> > > > > > On Tue, Jun 28, 2022 at 12:31:55PM +0100, Matthew Wilcox wrote:
> > > > > > > On Tue, Jun 28, 2022 at 12:27:40PM +0100, Matthew Wilcox wrote:
> > > > > > > > On Tue, Jun 28, 2022 at 05:31:20PM +1000, Dave Chinner wrote:
> > > > > > > > > So using this technique, I've discovered that there's a dirty page
> > > > > > > > > accounting leak that eventually results in fsx hanging in
> > > > > > > > > balance_dirty_pages().
> > > > > > > >
> > > > > > > > Alas, I think this is only an accounting error, and not related to
> > > > > > > > the problem(s) that Darrick & Zorro are seeing. I think what you're
> > > > > > > > seeing is dirty pages being dropped at truncation without the
> > > > > > > > appropriate accounting. ie this should be the fix:
> > > > > > >
> > > > > > > Argh, try one that actually compiles.
> > > > > >
> > > > > > ... that one's going to underflow the accounting. Maybe I shouldn't
> > > > > > be writing code at 6am?
> > > > > >
> > > > > > diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> > > > > > index f7248002dad9..4eec6ee83e44 100644
> > > > > > --- a/mm/huge_memory.c
> > > > > > +++ b/mm/huge_memory.c
> > > > > > @@ -18,6 +18,7 @@
> > > > > > #include <linux/shrinker.h>
> > > > > > #include <linux/mm_inline.h>
> > > > > > #include <linux/swapops.h>
> > > > > > +#include <linux/backing-dev.h>
> > > > > > #include <linux/dax.h>
> > > > > > #include <linux/khugepaged.h>
> > > > > > #include <linux/freezer.h>
> > > > > > @@ -2439,11 +2440,15 @@ static void __split_huge_page(struct page *page, struct list_head *list,
> > > > > > __split_huge_page_tail(head, i, lruvec, list);
> > > > > > /* Some pages can be beyond EOF: drop them from page cache */
> > > > > > if (head[i].index >= end) {
> > > > > > - ClearPageDirty(head + i);
> > > > > > - __delete_from_page_cache(head + i, NULL);
> > > > > > + struct folio *tail = page_folio(head + i);
> > > > > > +
> > > > > > if (shmem_mapping(head->mapping))
> > > > > > shmem_uncharge(head->mapping->host, 1);
> > > > > > - put_page(head + i);
> > > > > > + else if (folio_test_clear_dirty(tail))
> > > > > > + folio_account_cleaned(tail,
> > > > > > + inode_to_wb(folio->mapping->host));
> > > > > > + __filemap_remove_folio(tail, NULL);
> > > > > > + folio_put(tail);
> > > > > > } else if (!PageAnon(page)) {
> > > > > > __xa_store(&head->mapping->i_pages, head[i].index,
> > > > > > head + i, 0);
> > > > > >
> > > > >
> > > > > Yup, that fixes the leak.
> > > > >
> > > > > Tested-by: Dave Chinner <dchinner@redhat.com>
> > > >
> > > > Four hours of generic/522 running is long enough to conclude that this
> > > > is likely the fix for my problem and migrate long soak testing to my
> > > > main g/522 rig and:
> > > >
> > > > Tested-by: Darrick J. Wong <djwong@kernel.org>
> > > >
> > >
> > > Just based on Willy's earlier comment.. what I would probably be a
> > > little careful/curious about here is whether the accounting fix leads to
> > > an indirect behavior change that does impact reproducibility of the
> > > corruption problem. For example, does artificially escalated dirty page
> > > tracking lead to increased reclaim/writeback activity than might
> > > otherwise occur, and thus contend with the fs workload? Clearly it has
> > > some impact based on Dave's balance_dirty_pages() problem reproducer,
> > > but I don't know if it extends beyond that off the top of my head. That
> > > might make some sense if the workload is fsx, since that doesn't
> > > typically stress cache/memory usage the way a large fsstress workload or
> > > something might.
> > >
> > > So for example, interesting questions might be... Do your corruption
> > > events happen to correspond with dirty page accounting crossing some
> > > threshold based on available memory in your test environment? Does
> > > reducing available memory affect reproducibility? Etc.
> >
> > Yeah, I wonder that too now. I managed to trace generic/522 a couple of
> > times before willy's patch dropped. From what I could tell, a large
> > folio X would get page P assigned to the fsx file's page cache to cover
> > range R, dirtied, and written to disk. At some point later, we'd
> > reflink into part of the file range adjacent to P, but not P itself.
> > I /think/ that should have caused the whole folio to get invalidated?
> >
> > Then some more things happened (none of which dirtied R, according to
> > fsx) and then suddenly writeback would trigger on some page (don't know
> > which) that would write to the disk blocks backing R. I'm fairly sure
> > that's where the incorrect disk contents came from.
> >
> > Next, we'd reflink part of the file range including R into a different
> > part of the file (call it R2). fsx would read R2, bringing a new page
> > into cache, and it wouldn't match the fsxgood buffer, leading to fsx
> > aborting.
> >
> > After a umount/mount cycle, reading R and R2 would both reveal the
> > incorrect contents that had caused fsx to abort.
> >
>
> FWIW, I hadn't been able to reproduce this in my default environment to
> this point. With the memory leak issue in the light, I was eventually
> able to by reducing dirty_bytes to something the system would be more
> likely to hit sooner (i.e. 16-32MB), but I also see stalling behavior
> and whatnot due to the leak that requires backing off from the specified
> dirty limit every so often.
>
> If I apply the accounting patch to avoid the leak and set
> dirty_background_bytes to something notably aggressive (1kB), the test
> survived 100 iterations or so before I stopped it. If I then set
> dirty_bytes to something similarly aggressive (1MB), I hit the failure
> on the next iteration (assuming it's the same problem). It's spinning
> again at ~25 or so iterations without a failure so far, so I'd have to
> wait and see how reliable the reproducer really is. Though if it doesn't
> reoccur soonish, perhaps I'll try reducing dirty_bytes a bit more...
>
> My suspicion based on these characteristics would be that the blocking
> limit triggers more aggressive reclaim/invalidation, and thus helps
> detect the problem sooner. If reflink is involved purely as a cache
> invalidation step (i.e. so a subsequent read will hit the disk and
> detect a cache inconsistency), then it might be interesting to see if it
> can still be reproduced without reflink operations enabled but instead
> with some combination of the -f/-X fsx flags to perform more flush
> invals and on-disk data checks..

Hm. I didn't try -f or lowering dirty_bytes, but with the reflink
operations disabled, g522 ran for 3 hours before I gave up and killed
it. I would've thought that the fallocate zero/collapse/insert range
functions (which use the same flush/unmap helper) would have sufficed to
make the problem happen, but ... it didn't.

I think I'll try changing dirty_bytes next, to see if I can reproduce
the problem that way. I'm not surprised that you had to set dirty_bytes
to 1MB, since 522 is only ever creating a 600K file anyway.

(Hopefully willy will be back next week to help us shed some light on
this.)

--D

> Brian
>
> > Unfortunately the second ftrace attempt ate some trace data, so I was
> > unable to figure out if the same thing happened again.
> >
> > At this point I really need to get on reviewing patches for 5.20, so
> > I'll try to keep poking at this (examining the trace data requires a lot
> > of concentration which isn't really possible while sawzall construction
> > is going on at home) but at worst I can ask Linus to merge a patch for
> > 5.19 final that makes setting mapping_set_large_folio a
> > Kconfig/CONFIG_XFS_DEBUG option.
> >
> > --D
> >
> > >
> > > Brian
> > >
> > > > --D
> > > >
> > > > > Cheers,
> > > > >
> > > > > Dave.
> > > > > --
> > > > > Dave Chinner
> > > > > david@fromorbit.com
> > > >
> > >
> >
>

\
 
 \ /
  Last update: 2022-07-01 20:03    [W:0.077 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site