lkml.org 
[lkml]   [2022]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v2 5/5] ASoC: apple: Add macaudio machine driver
On Thu, Jun 09, 2022 at 04:09:57PM +0200, Martin Povišer wrote:
> > On 9. 6. 2022, at 15:33, Mark Brown <broonie@kernel.org> wrote:

> >> + /*
> >> + * Primary FE
> >> + *
> >> + * The mclk/fs ratio at 64 for the primary frontend is important
> >> + * to ensure that the headphones codec's idea of left and right
> >> + * in a stereo stream over I2S fits in nicely with everyone else's.
> >> + * (This is until the headphones codec's driver supports
> >> + * set_tdm_slot.)
> >> + *
> >> + * The low mclk/fs ratio precludes transmitting more than two
> >> + * channels over I2S, but that's okay since there is the secondary
> >> + * FE for speaker arrays anyway.
> >> + */
> >> + .mclk_fs = 64,
> >> + },

> > This seems weird - it looks like it's confusing MCLK and the bit clock
> > for the audio bus. These are two different clocks. Note that it's very
> > common for devices to require a higher MCLK/fs ratio to deliver the best
> > audio performance, 256fs is standard.

> On these machines we are not producing any other clock for the codecs
> besides the bit clock, so I am using MCLK interchangeably for it. (It is
> what the sample rate is derived from after all.)

Please don't do this, you're just making everything needlessly hard to
understand by using standard terminology inappropriately and there's a
risk of breakage further down the line with drivers implementing the
standard ops.

> One of the codec drivers this is to be used with (cs42l42) expects to be
> given the I2S bit clock with

> snd_soc_dai_set_sysclk(dai, 0, mclk, SND_SOC_CLOCK_IN);

That's very, very non-standard...

> I can rename mclk to bclk in all of the code to make it clearer maybe.
> Also the platform driver can take the bit clock value from set_bclk_ratio,
> instead of set_sysclk from where it takes it now. The cs42l42 driver I can
> patch too to accept set_bclk_ratio.

...indeed, set_bclk_ratio() is a better interface for setting the bclk
ratio - the CODEC driver should really be doing that as well.

> > This shouldn't be open coded in a driver, please factor it out into the
> > core so we've got an API for "set limit X on control Y" then call that.

> There’s already snd_soc_limit_volume, but it takes a fixed control name.
> Can I extend it to understand patterns beginning with a wildcard, like
> '* Amp Gain Volume’?

Or add a new call that does that.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-06-09 17:19    [W:0.074 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site