lkml.org 
[lkml]   [2022]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/48] arm64: dts: amlogic: align gpio-key node names with dtschema
Date
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index a5d79f2f7c19..603337ca5608 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -48,7 +48,7 @@ emmc_pwrseq: emmc-pwrseq {
gpio-keys {
compatible = "gpio-keys";

- key1 {
+ key-1 {
label = "A";
linux,code = <BTN_0>;
gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
@@ -56,7 +56,7 @@ key1 {
interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
};

- key2 {
+ key-2 {
label = "B";
linux,code = <BTN_1>;
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
@@ -64,7 +64,7 @@ key2 {
interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
};

- key3 {
+ key-3 {
label = "C";
linux,code = <BTN_2>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@@ -72,7 +72,7 @@ key3 {
interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
};

- mic_mute {
+ key-mic-mute {
label = "MicMute";
linux,code = <SW_MUTE_DEVICE>;
linux,input-type = <EV_SW>;
@@ -81,7 +81,7 @@ mic_mute {
interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
};

- power_key {
+ key-power {
label = "PowerKey";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
--
2.34.1
\
 
 \ /
  Last update: 2022-06-09 13:41    [W:0.484 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site