lkml.org 
[lkml]   [2022]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant
Hi,

On Mon 31 Jan 22, 17:47, quentin.schulz@theobroma-systems.com wrote:
> From: Klaus Goger <klaus.goger@theobroma-systems.com>
>
> The LTK050H3148W-CTA6 is a 5.0" 720x1280 DSI display, whose driving
> controller is a Himax HX8394-F, slightly different from LTK050H3146W by
> its init sequence, mode details and mode flags.
>
> Cc: Quentin Schulz <foss+kernel@0leil.net>
> Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

Cheers,

Paul

> ---
> .../drm/panel/panel-leadtek-ltk050h3146w.c | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> index 67eb474e28c6..3be815c3be68 100644
> --- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> +++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
> @@ -253,6 +253,89 @@ struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel)
> return ret; \
> } while (0)
>
> +static int ltk050h3148w_init_sequence(struct ltk050h3146w *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + int ret;
> +
> + /*
> + * Init sequence was supplied by the panel vendor without much
> + * documentation.
> + */
> + dsi_dcs_write_seq(dsi, 0xb9, 0xff, 0x83, 0x94);
> + dsi_dcs_write_seq(dsi, 0xb1, 0x50, 0x15, 0x75, 0x09, 0x32, 0x44, 0x71,
> + 0x31, 0x55, 0x2f);
> + dsi_dcs_write_seq(dsi, 0xba, 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> + dsi_dcs_write_seq(dsi, 0xd2, 0x88);
> + dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0x80, 0x64, 0x10, 0x07);
> + dsi_dcs_write_seq(dsi, 0xb4, 0x05, 0x70, 0x05, 0x70, 0x01, 0x70, 0x01,
> + 0x0c, 0x86, 0x75, 0x00, 0x3f, 0x01, 0x74, 0x01, 0x74,
> + 0x01, 0x74, 0x01, 0x0c, 0x86);
> + dsi_dcs_write_seq(dsi, 0xd3, 0x00, 0x00, 0x07, 0x07, 0x40, 0x1e, 0x08,
> + 0x00, 0x32, 0x10, 0x08, 0x00, 0x08, 0x54, 0x15, 0x10,
> + 0x05, 0x04, 0x02, 0x12, 0x10, 0x05, 0x07, 0x33, 0x34,
> + 0x0c, 0x0c, 0x37, 0x10, 0x07, 0x17, 0x11, 0x40);
> + dsi_dcs_write_seq(dsi, 0xd5, 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a,
> + 0x1a, 0x04, 0x05, 0x06, 0x07, 0x00, 0x01, 0x02, 0x03,
> + 0x20, 0x21, 0x18, 0x18, 0x22, 0x23, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18);
> + dsi_dcs_write_seq(dsi, 0xd6, 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a,
> + 0x1a, 0x03, 0x02, 0x01, 0x00, 0x07, 0x06, 0x05, 0x04,
> + 0x23, 0x22, 0x18, 0x18, 0x21, 0x20, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18);
> + dsi_dcs_write_seq(dsi, 0xe0, 0x00, 0x03, 0x09, 0x11, 0x11, 0x14, 0x18,
> + 0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6c, 0x72, 0x78,
> + 0x88, 0x8b, 0x86, 0xa4, 0xb2, 0x58, 0x55, 0x59, 0x5b,
> + 0x5d, 0x60, 0x64, 0x7f, 0x00, 0x03, 0x09, 0x0f, 0x11,
> + 0x14, 0x18, 0x16, 0x2e, 0x3d, 0x4d, 0x4d, 0x58, 0x6d,
> + 0x73, 0x78, 0x88, 0x8b, 0x87, 0xa5, 0xb2, 0x58, 0x55,
> + 0x58, 0x5b, 0x5d, 0x61, 0x65, 0x7f);
> + dsi_dcs_write_seq(dsi, 0xcc, 0x0b);
> + dsi_dcs_write_seq(dsi, 0xc0, 0x1f, 0x31);
> + dsi_dcs_write_seq(dsi, 0xb6, 0xc4, 0xc4);
> + dsi_dcs_write_seq(dsi, 0xbd, 0x01);
> + dsi_dcs_write_seq(dsi, 0xb1, 0x00);
> + dsi_dcs_write_seq(dsi, 0xbd, 0x00);
> + dsi_dcs_write_seq(dsi, 0xc6, 0xef);
> + dsi_dcs_write_seq(dsi, 0xd4, 0x02);
> + dsi_dcs_write_seq(dsi, 0x11);
> + dsi_dcs_write_seq(dsi, 0x29);
> +
> + ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
> + if (ret < 0) {
> + dev_err(ctx->dev, "failed to set tear on: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(60);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode ltk050h3148w_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 12,
> + .hsync_end = 720 + 12 + 6,
> + .htotal = 720 + 12 + 6 + 24,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 9,
> + .vsync_end = 1280 + 9 + 2,
> + .vtotal = 1280 + 9 + 2 + 16,
> + .clock = 59756,
> + .width_mm = 62,
> + .height_mm = 110,
> +};
> +
> +static const struct ltk050h3146w_desc ltk050h3148w_data = {
> + .mode = &ltk050h3148w_mode,
> + .init = ltk050h3148w_init_sequence,
> + .mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
> +};
> +
> static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
> {
> struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> @@ -657,6 +740,10 @@ static const struct of_device_id ltk050h3146w_of_match[] = {
> .compatible = "leadtek,ltk050h3146w-a2",
> .data = &ltk050h3146w_a2_data,
> },
> + {
> + .compatible = "leadtek,ltk050h3148w",
> + .data = &ltk050h3148w_data,
> + },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match);
> --
> 2.34.1
>

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2022-06-09 10:54    [W:0.096 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site