lkml.org 
[lkml]   [2022]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 18/20] arm64: dts: nuvoton: Add initial NPCM8XX device tree
Hi Krzysztof,

Sorry, probably I missed your comments (too many patches to handle at
one time :-))...

On Wed, 8 Jun 2022 at 13:21, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 08/06/2022 11:56, Tomer Maimon wrote:
> > This adds initial device tree support for the
> > Nuvoton NPCM845 Board Management controller (BMC) SoC family.
> >
> > The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and
> > have various peripheral IPs.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> > ---
> > arch/arm64/boot/dts/Makefile | 1 +
> > .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 197 ++++++++++++++++++
> > .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++++++
> > 3 files changed, 274 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
> > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> > index 1ba04e31a438..7b107fa7414b 100644
> > --- a/arch/arm64/boot/dts/Makefile
> > +++ b/arch/arm64/boot/dts/Makefile
> > @@ -19,6 +19,7 @@ subdir-y += lg
> > subdir-y += marvell
> > subdir-y += mediatek
> > subdir-y += microchip
> > +subdir-y += nuvoton
> > subdir-y += nvidia
> > subdir-y += qcom
> > subdir-y += realtek
> > diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
> > new file mode 100644
> > index 000000000000..97e108c50760
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
> > @@ -0,0 +1,197 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com
> > +
> > +#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +/ {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + interrupt-parent = <&gic>;
> > +
> > + /* external reference clock */
> > + clk_refclk: clk-refclk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <25000000>;
>
> Ignored comment.
Could we use it as a default clock-frequency?
>
> > + clock-output-names = "refclk";
> > + };
> > +
> > + /* external reference clock for cpu. float in normal operation */
> > + clk_sysbypck: clk-sysbypck {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <1000000000>;
>
> Ignored comment.
same as above
>
> > + clock-output-names = "sysbypck";
> > + };
> > +
> > + /* external reference clock for MC. float in normal operation */
> > + clk_mcbypck: clk-mcbypck {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <1050000000>;
same as above
> > + clock-output-names = "mcbypck";
> > + };
> > +
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + interrupt-parent = <&gic>;
> > + ranges;
> > +
> > + gcr: gcr@f0800000 {
I understand it sounds generic but I try to be as much compatible with NPCM7XX
https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L91
>
> Ignored comment.
>
> > + compatible = "nuvoton,npcm845-gcr", "syscon",
> > + "simple-mfd";
>
> This is not a simple-mfd... I see original bindings defined it that way,
> but why? I think they should be corrected - remove simple-mfd from the
> bindings and DTS.
will remove in both places in V3
>
>
> > + reg = <0x0 0xf0800000 0x0 0x1000>;
> > + };
> > +
> > + gic: interrupt-controller@dfff9000 {
> > + compatible = "arm,gic-400";
> > + reg = <0x0 0xdfff9000 0x0 0x1000>,
> > + <0x0 0xdfffa000 0x0 0x2000>,
> > + <0x0 0xdfffc000 0x0 0x2000>,
> > + <0x0 0xdfffe000 0x0 0x2000>;
> > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> > + #interrupt-cells = <3>;
> > + interrupt-controller;
> > + #address-cells = <0>;
> > + ppi-partitions {
> > + ppi_cluster0: interrupt-partition-0 {
> > + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + ahb {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + compatible = "simple-bus";
> > + interrupt-parent = <&gic>;

> > + ranges;
> > +
> > + rstc: rstc@f0801000 {
>
> Ignored comment.
>
I understand it sounds generic but I try to be as much compatible with NPCM7XX
https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L109
> Four comments from v1 ignored in this patch alone.
>
one more comment in V1
"+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ clocks = <&clk NPCM8XX_CLK_CPU>;
+ reg = <0x0 0x0>;
Why do you have two address cells? A bit more complicated and not
necessary, I think."
the arm,cortex-a35 is 64 Bit this is why we use #address-cells = <2>;
and therefore reg = <0x0 0x0>;

> I'll stop reviewing, it is a waste of my time.
>
> NAK for this change.
>
> Best regards,
> Krzysztof

Again sorry to miss these comments in V1.

Appreciate your time.

Best regards,

Tomer

\
 
 \ /
  Last update: 2022-06-10 00:32    [W:0.360 / U:1.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site