lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/3] dt-bindings: mediatek: add vdosys1 RDMA definition for mt8195
Date
From: "Nancy.Lin" <nancy.lin@mediatek.com>

Add vdosys1 RDMA definition.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
.../display/mediatek/mediatek,mdp-rdma.yaml | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 000000000000..dd12e2ff685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+ - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+ - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+ The MediaTek MDP RDMA stands for Read Direct Memory Access.
+ It provides real time data to the back-end panel driver, such as DSI,
+ DPI and DP_INTF.
+ It contains one line buffer to store the sufficient pixel data.
+ RDMA device node must be siblings to the central MMSYS_CONFIG node.
+ For a description of the MMSYS_CONFIG binding, see
+ Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+ compatible:
+ const: mediatek,mt8195-vdo1-rdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: RDMA Clock
+
+ iommus:
+ maxItems: 1
+
+ mediatek,gce-client-reg:
+ description:
+ The register of display function block to be set by gce. There are 4 arguments,
+ such as gce node, subsys id, offset and register size. The subsys id that is
+ mapping to the register of display function blocks is defined in the gce header
+ include/dt-bindings/gce/<chip>-gce.h of each chips.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle of GCE
+ - description: GCE subsys id
+ - description: register offset
+ - description: register size
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - clocks
+ - iommus
+ - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt8195-clk.h>
+ #include <dt-bindings/power/mt8195-power.h>
+ #include <dt-bindings/gce/mt8195-gce.h>
+ #include <dt-bindings/memory/mt8195-memory-port.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ rdma@1c104000 {
+ compatible = "mediatek,mt8195-vdo1-rdma";
+ reg = <0 0x1c104000 0 0x1000>;
+ interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+ iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+ mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+ };
+ };
--
2.18.0
\
 
 \ /
  Last update: 2022-06-08 07:39    [W:0.044 / U:1.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site