lkml.org 
[lkml]   [2022]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] remoteproc: omap_remoteproc: Fix typo in comment
Date
Delete the redundant word 'The'.
Delete the redundant word 'to'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
---
drivers/remoteproc/omap_remoteproc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 32a588fefbdc..430fab0266ed 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -243,7 +243,7 @@ static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
* omap_rproc_ack_timer_irq() - acknowledge a timer irq
* @timer: handle to a OMAP rproc timer
*
- * This function is used to clear the irq associated with a watchdog timer. The
+ * This function is used to clear the irq associated with a watchdog timer.
* The function is called by the OMAP remoteproc upon a watchdog event on the
* remote processor to clear the interrupt status of the watchdog timer.
*/
@@ -303,7 +303,7 @@ static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
* @configure: boolean flag used to acquire and configure the timer handle
*
* This function is used primarily to enable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
* to either acquire and start a timer (during device initialization) or
* to just start a timer (during a resume operation).
*
@@ -443,7 +443,7 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
* @configure: boolean flag used to release the timer handle
*
* This function is used primarily to disable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
* to either stop and release a timer (during device shutdown) or to just
* stop a timer (during a suspend operation).
*
--
2.36.1
\
 
 \ /
  Last update: 2022-06-08 15:07    [W:0.049 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site